[PATCH net-next 08/15] can: dev: add can_tdc_get_relative_tdco() helper function
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2021-10-24 20:44:50
Also in:
linux-can
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
From: Vincent Mailhol <redacted> struct can_tdc::tdco represents the absolute offset from TDCV. Some controllers use instead an offset relative to the Sample Point (SP) such that: | SSP = TDCV + absolute TDCO | = TDCV + SP + relative TDCO Consequently: | relative TDCO = absolute TDCO - SP The function can_tdc_get_relative_tdco() allow to retrieve this relative TDCO value. Link: https://lore.kernel.org/all/20210918095637.20108-7-mailhol.vincent@wanadoo.fr (local) CC: Stefan Mätje <Stefan.Maetje@esd.eu> Signed-off-by: Vincent Mailhol <redacted> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- include/linux/can/dev.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index b4aa0f048cab..45f19d9db5ca 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h@@ -102,6 +102,35 @@ static inline bool can_tdc_is_enabled(const struct can_priv *priv) return !!(priv->ctrlmode & CAN_CTRLMODE_TDC_MASK); } +/* + * can_get_relative_tdco() - TDCO relative to the sample point + * + * struct can_tdc::tdco represents the absolute offset from TDCV. Some + * controllers use instead an offset relative to the Sample Point (SP) + * such that: + * + * SSP = TDCV + absolute TDCO + * = TDCV + SP + relative TDCO + * + * -+----------- one bit ----------+-- TX pin + * |<--- Sample Point --->| + * + * --+----------- one bit ----------+-- RX pin + * |<-------- TDCV -------->| + * |<------------------------>| absolute TDCO + * |<--- Sample Point --->| + * | |<->| relative TDCO + * |<------------- Secondary Sample Point ------------>| + */ +static inline s32 can_get_relative_tdco(const struct can_priv *priv) +{ + const struct can_bittiming *dbt = &priv->data_bittiming; + s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg + + dbt->phase_seg1) * dbt->brp; + + return (s32)priv->tdc.tdco - sample_point_in_tc; +} + /* helper to define static CAN controller features at device creation time */ static inline void can_set_static_ctrlmode(struct net_device *dev, u32 static_mode)
--
2.33.0