[PATCH] dt-bindings: net: renesas,ether: Update example to match reality
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: 2021-10-01 12:13:28
Also in:
linux-devicetree, linux-renesas-soc
Subsystem:
networking drivers, open firmware and flattened device tree bindings, renesas superh ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Niklas Söderlund, Linus Torvalds
- Drop unneeded interrupt-parent,
- Convert to new style CPG/MSSR bindings,
- Add missing power-domains and resets properties,
- Update PHY subnode:
- Add example compatible values,
- Add micrel,led-mode and reset-gpios examples.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
.../devicetree/bindings/net/renesas,ether.yaml | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index c101a1ec846ea8e9..06b38c9bc6ec38e4 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml@@ -100,15 +100,18 @@ additionalProperties: false examples: # Lager board - | - #include <dt-bindings/clock/r8a7790-clock.h> - #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/r8a7790-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + #include <dt-bindings/gpio/gpio.h> ethernet@ee700000 { compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether"; reg = <0xee700000 0x400>; - interrupt-parent = <&gic>; - interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 813>; phy-mode = "rmii"; phy-handle = <&phy1>; renesas,ether-link-active-low;
@@ -116,8 +119,12 @@ examples: #size-cells = <0>; phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1537", + "ethernet-phy-ieee802.3-c22"; reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; };
--
2.25.1