[PATCH v4 02/14] net: phy: at803x: use phy_modify()
From: Luo Jie <hidden>
Date: 2021-10-22 12:07:24
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Convert at803x_set_wol to use phy_modify. Signed-off-by: Luo Jie <redacted> --- drivers/net/phy/at803x.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index b04fb251bacb..19011c16a1da 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -349,16 +349,12 @@ static int at803x_set_wol(struct phy_device *phydev, phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i], mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); - value = phy_read(phydev, AT803X_INTR_ENABLE); - value |= AT803X_INTR_ENABLE_WOL; - ret = phy_write(phydev, AT803X_INTR_ENABLE, value); + ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL); if (ret) return ret; value = phy_read(phydev, AT803X_INTR_STATUS); } else { - value = phy_read(phydev, AT803X_INTR_ENABLE); - value &= (~AT803X_INTR_ENABLE_WOL); - ret = phy_write(phydev, AT803X_INTR_ENABLE, value); + ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0); if (ret) return ret; value = phy_read(phydev, AT803X_INTR_STATUS);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project