[PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

Subsystems: networking drivers, nfc subsystem, open firmware and flattened device tree bindings, the rest

STALE1756d LANDED

Landed in mainline as 243dde59a039 on 2021-10-28.

8 messages, 3 authors, 2021-10-26 · open the first message on its own page

[PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: David Heidelberg <david@ixit.cz>
Date: 2021-10-17 16:19:52

Convert bindings for NXP PN544 NFC driver to YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2
 - Krzysztof is a maintainer
 - pintctrl dropped
 - 4 space indent for example
 - nfc node name
v3
 - remove whole pinctrl
v4
 - drop clock-frequency, which is inherited by i2c bus

 .../bindings/net/nfc/nxp,pn544.yaml           | 56 +++++++++++++++++++
 .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
 2 files changed, 56 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 000000000000..4592d1194a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN544 NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    const: nxp,pn544-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the PN544
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - enable-gpios
+  - firmware-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@28 {
+            compatible = "nxp,pn544-i2c";
+            reg = <0x28>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
deleted file mode 100644
index 2bd82562ce8e..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors PN544 NFC Controller
-
-Required properties:
-- compatible: Should be "nxp,pn544-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN544 on I2C2):
-
-&i2c2 {
-
-
-	pn544: pn544@28 {
-
-		compatible = "nxp,pn544-i2c";
-
-		reg = <0x28>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	};
-};
-- 
2.33.0

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: Krzysztof Kozlowski <hidden>
Date: 2021-10-17 16:37:45

On 17/10/2021 18:02, David Heidelberg wrote:
Convert bindings for NXP PN544 NFC driver to YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2
 - Krzysztof is a maintainer
 - pintctrl dropped
 - 4 space indent for example
 - nfc node name
v3
 - remove whole pinctrl
v4
 - drop clock-frequency, which is inherited by i2c bus

 .../bindings/net/nfc/nxp,pn544.yaml           | 56 +++++++++++++++++++
 .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
 2 files changed, 56 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt

Reviewed-by: Krzysztof Kozlowski <redacted>


Best regards,
Krzysztof

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: Rob Herring <robh@kernel.org>
Date: 2021-10-18 12:14:00

On Sun, 17 Oct 2021 18:02:10 +0200, David Heidelberg wrote:
Convert bindings for NXP PN544 NFC driver to YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2
 - Krzysztof is a maintainer
 - pintctrl dropped
 - 4 space indent for example
 - nfc node name
v3
 - remove whole pinctrl
v4
 - drop clock-frequency, which is inherited by i2c bus

 .../bindings/net/nfc/nxp,pn544.yaml           | 56 +++++++++++++++++++
 .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
 2 files changed, 56 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1542257


nfc@28: 'clock-frequency' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dt.yaml
	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dt.yaml

nfc@2a: 'clock-frequency' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dt.yaml

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: David Heidelberg <david@ixit.cz>
Date: 2021-10-18 13:05:43



On Mon, Oct 18 2021 at 07:13:53 -0500, Rob Herring [off-list ref] 
wrote:
On Sun, 17 Oct 2021 18:02:10 +0200, David Heidelberg wrote:
quoted
 Convert bindings for NXP PN544 NFC driver to YAML syntax.

 Signed-off-by: David Heidelberg [off-list ref]
 ---
 v2
  - Krzysztof is a maintainer
  - pintctrl dropped
  - 4 space indent for example
  - nfc node name
 v3
  - remove whole pinctrl
 v4
  - drop clock-frequency, which is inherited by i2c bus

  .../bindings/net/nfc/nxp,pn544.yaml           | 56 
+++++++++++++++++++
  .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
  2 files changed, 56 insertions(+), 33 deletions(-)
  create mode 100644 
Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
  delete mode 100644 
Documentation/devicetree/bindings/net/nfc/pn544.txt
Full log is available here: https://patchwork.ozlabs.org/patch/1542257
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for 
dtbs_check.
This will change in the future.



nfc@28: 'clock-frequency' does not match any of the regexes: 
'pinctrl-[0-9]+'
	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dt.yaml
	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dt.yaml

nfc@2a: 'clock-frequency' does not match any of the regexes: 
'pinctrl-[0-9]+'
	arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dt.yaml
Patches for this are already in grate repository and will be sent to 
mainline soon! :)

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: Rob Herring <robh@kernel.org>
Date: 2021-10-18 18:34:54

On Mon, Oct 18, 2021 at 03:04:03PM +0200, David Heidelberg wrote:


On Mon, Oct 18 2021 at 07:13:53 -0500, Rob Herring [off-list ref] wrote:
quoted
On Sun, 17 Oct 2021 18:02:10 +0200, David Heidelberg wrote:
quoted
 Convert bindings for NXP PN544 NFC driver to YAML syntax.

 Signed-off-by: David Heidelberg [off-list ref]
 ---
 v2
  - Krzysztof is a maintainer
  - pintctrl dropped
  - 4 space indent for example
  - nfc node name
 v3
  - remove whole pinctrl
 v4
  - drop clock-frequency, which is inherited by i2c bus

  .../bindings/net/nfc/nxp,pn544.yaml           | 56
+++++++++++++++++++
  .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
  2 files changed, 56 insertions(+), 33 deletions(-)
  create mode 100644
Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
  delete mode 100644
Documentation/devicetree/bindings/net/nfc/pn544.txt
Full log is available here: https://patchwork.ozlabs.org/patch/1542257
quoted
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.



nfc@28: 'clock-frequency' does not match any of the regexes:
'pinctrl-[0-9]+'
	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dt.yaml
	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dt.yaml

nfc@2a: 'clock-frequency' does not match any of the regexes:
'pinctrl-[0-9]+'
	arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dt.yaml
Patches for this are already in grate repository and will be sent to
mainline soon! :)
Okay. I was under the impression 'clock-frequency' was removed thinking 
it is in the i2c bus schema already. It is, but unfortunately you need 
it here too if used because all properties for a node have to be listed 
in the schema for the node. 'unevaluatedProperties' can't evaluate 
properties in the child nodes of the parent schema with the properties 
of the child schema.

Rob

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: David Heidelberg <david@ixit.cz>
Date: 2021-10-23 22:10:51

Well, but the nxp,pn544 won't using `clock-frequency`. So do I have to 
keep the property there anyway?

David


On Mon, Oct 18 2021 at 13:34:47 -0500, Rob Herring [off-list ref] 
wrote:
On Mon, Oct 18, 2021 at 03:04:03PM +0200, David Heidelberg wrote:
quoted


 On Mon, Oct 18 2021 at 07:13:53 -0500, Rob Herring 
[off-list ref] wrote:
 > On Sun, 17 Oct 2021 18:02:10 +0200, David Heidelberg wrote:
 > >  Convert bindings for NXP PN544 NFC driver to YAML syntax.
 > >
 > >  Signed-off-by: David Heidelberg [off-list ref]
 > >  ---
 > >  v2
 > >   - Krzysztof is a maintainer
 > >   - pintctrl dropped
 > >   - 4 space indent for example
 > >   - nfc node name
 > >  v3
 > >   - remove whole pinctrl
 > >  v4
 > >   - drop clock-frequency, which is inherited by i2c bus
 > >
 > >   .../bindings/net/nfc/nxp,pn544.yaml           | 56
 > > +++++++++++++++++++
 > >   .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
 > >   2 files changed, 56 insertions(+), 33 deletions(-)
 > >   create mode 100644
 > > Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
 > >   delete mode 100644
 > > Documentation/devicetree/bindings/net/nfc/pn544.txt
 > >
 Full log is available here: 
https://patchwork.ozlabs.org/patch/1542257
 >
 > Running 'make dtbs_check' with the schema in this patch gives the
 > following warnings. Consider if they are expected or the schema is
 > incorrect. These may not be new warnings.
 >
 > Note that it is not yet a requirement to have 0 warnings for 
dtbs_check.
 > This will change in the future.
 >
 >
 >
 > nfc@28: 'clock-frequency' does not match any of the regexes:
 > 'pinctrl-[0-9]+'
 > 	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dt.yaml
 > 	arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dt.yaml
 >
 > nfc@2a: 'clock-frequency' does not match any of the regexes:
 > 'pinctrl-[0-9]+'
 > 	arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dt.yaml
 >

 Patches for this are already in grate repository and will be sent to
 mainline soon! :)
Okay. I was under the impression 'clock-frequency' was removed 
thinking
it is in the i2c bus schema already. It is, but unfortunately you need
it here too if used because all properties for a node have to be 
listed
in the schema for the node. 'unevaluatedProperties' can't evaluate
properties in the child nodes of the parent schema with the properties
of the child schema.

Rob

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: Rob Herring <robh@kernel.org>
Date: 2021-10-26 23:32:59

On Sun, Oct 17, 2021 at 06:02:10PM +0200, David Heidelberg wrote:
quoted hunk
Convert bindings for NXP PN544 NFC driver to YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2
 - Krzysztof is a maintainer
 - pintctrl dropped
 - 4 space indent for example
 - nfc node name
v3
 - remove whole pinctrl
v4
 - drop clock-frequency, which is inherited by i2c bus

 .../bindings/net/nfc/nxp,pn544.yaml           | 56 +++++++++++++++++++
 .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
 2 files changed, 56 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 000000000000..4592d1194a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN544 NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+  compatible:
+    const: nxp,pn544-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the PN544
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
*-gpios needs to say how many (maxItems: 1). I'll fix when applying.
quoted hunk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - enable-gpios
+  - firmware-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@28 {
+            compatible = "nxp,pn544-i2c";
+            reg = <0x28>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
deleted file mode 100644
index 2bd82562ce8e..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors PN544 NFC Controller
-
-Required properties:
-- compatible: Should be "nxp,pn544-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN544 on I2C2):
-
-&i2c2 {
-
-
-	pn544: pn544@28 {
-
-		compatible = "nxp,pn544-i2c";
-
-		reg = <0x28>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	};
-};
-- 
2.33.0

Re: [PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml

From: Rob Herring <robh@kernel.org>
Date: 2021-10-26 23:33:05

On Sun, 17 Oct 2021 18:02:10 +0200, David Heidelberg wrote:
Convert bindings for NXP PN544 NFC driver to YAML syntax.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
v2
 - Krzysztof is a maintainer
 - pintctrl dropped
 - 4 space indent for example
 - nfc node name
v3
 - remove whole pinctrl
v4
 - drop clock-frequency, which is inherited by i2c bus

 .../bindings/net/nfc/nxp,pn544.yaml           | 56 +++++++++++++++++++
 .../devicetree/bindings/net/nfc/pn544.txt     | 33 -----------
 2 files changed, 56 insertions(+), 33 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt
Applied, thanks!
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help