[PATCH v4] dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
From: David Heidelberg <david@ixit.cz>
Date: 2021-10-17 16:19:52
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, nfc subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, David Heidelberg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Convert bindings for NXP PN544 NFC driver to YAML syntax. Signed-off-by: David Heidelberg <david@ixit.cz> --- v2 - Krzysztof is a maintainer - pintctrl dropped - 4 space indent for example - nfc node name v3 - remove whole pinctrl v4 - drop clock-frequency, which is inherited by i2c bus .../bindings/net/nfc/nxp,pn544.yaml | 56 +++++++++++++++++++ .../devicetree/bindings/net/nfc/pn544.txt | 33 ----------- 2 files changed, 56 insertions(+), 33 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml delete mode 100644 Documentation/devicetree/bindings/net/nfc/pn544.txt
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 000000000000..4592d1194a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml@@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Semiconductors PN544 NFC Controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + const: nxp,pn544-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + enable-gpios: + description: Output GPIO pin used for enabling/disabling the PN544 + + firmware-gpios: + description: Output GPIO pin used to enter firmware download mode + +required: + - compatible + - reg + - interrupts + - enable-gpios + - firmware-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + }; + };
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
deleted file mode 100644
index 2bd82562ce8e..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ /dev/null@@ -1,33 +0,0 @@ -* NXP Semiconductors PN544 NFC Controller - -Required properties: -- compatible: Should be "nxp,pn544-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus -- interrupts: GPIO interrupt to which the chip is connected -- enable-gpios: Output GPIO pin used for enabling/disabling the PN544 -- firmware-gpios: Output GPIO pin used to enter firmware download mode - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBone with PN544 on I2C2): - -&i2c2 { - - - pn544: pn544@28 { - - compatible = "nxp,pn544-i2c"; - - reg = <0x28>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio1>; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; - - enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; - }; -};
--
2.33.0