This patch series add the qca8081 ethernet phy driver support, which
improve the wol feature, leverage at803x phy driver and add the fast
retrain, master/slave seed and CDT feature.

Changes in v2:
	* add definitions of fast retrain related registers in mdio.h.
	* break up the patch into small patches.
	* improve the at803x legacy code.

Changes in v1:
	* merge qca8081 phy driver into at803x.
	* add cdt feature.
	* leverage at803x phy driver helpers.

Luo Jie (13):
  net: phy: at803x: replace AT803X_DEVICE_ADDR with MDIO_MMD_PCS
  net: phy: at803x: use phy_modify()
  net: phy: at803x: improve the WOL feature
  net: phy: at803x: use GENMASK() for speed status
  net: phy: add qca8081 ethernet phy driver
  net: phy: add qca8081 read_status
  net: phy: add qca8081 get_features
  net: phy: add qca8081 config_aneg
  net: phy: add constants for fast retrain related register
  net: phy: add qca8081 config_init
  net: phy: add qca8081 soft_reset and enable master/slave seed
  net: phy: adjust qca8081 master/slave seed value if link down
  net: phy: add qca8081 cdt feature

 drivers/net/phy/at803x.c  | 572 +++++++++++++++++++++++++++++++++++---
 include/uapi/linux/mdio.h |  10 +
 2 files changed, 536 insertions(+), 46 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project