[PATCH net-next v2 1/1] net: phy: dp83867: introduce critical chip default init for non-of platform
From: Ong Boon Leong <hidden>
Date: 2021-10-13 06:53:44
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: "Lay, Kuan Loon" <redacted> PHY driver dp83867 has rich supports for OF-platform to fine-tune the PHY chip during phy configuration. However, for non-OF platform, certain PHY tunable parameters such as IO impedance and RX & TX internal delays are critical and should be initialized to its default during PHY driver probe. Tested-by: Clement <redacted> Signed-off-by: Lay, Kuan Loon <redacted> Co-developed-by: Ong Boon Leong <redacted> Signed-off-by: Ong Boon Leong <redacted> --- drivers/net/phy/dp83867.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 6bbc81ad295f..914619f3f0e3 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c@@ -619,6 +619,25 @@ static int dp83867_of_init(struct phy_device *phydev) #else static int dp83867_of_init(struct phy_device *phydev) { + struct dp83867_private *dp83867 = phydev->priv; + u16 delay; + + /* For non-OF device, the RX and TX ID values are either strapped + * or take from default value. So, we init RX & TX ID values here + * so that the RGMIIDCTL is configured correctly later in + * dp83867_config_init(); + */ + delay = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL); + dp83867->rx_id_delay = delay & DP83867_RGMII_RX_CLK_DELAY_MAX; + dp83867->tx_id_delay = (delay >> DP83867_RGMII_TX_CLK_DELAY_SHIFT) & + DP83867_RGMII_TX_CLK_DELAY_MAX; + + /* Per datasheet, IO impedance is default to 50-ohm, so we set the + * same here or else the default '0' means highest IO impedance + * which is wrong. + */ + dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2; + return 0; } #endif /* CONFIG_OF_MDIO */
--
2.25.1