Thread (21 messages) flat view 21 messages, 3 authors, 2021-10-13
STALE1769d REVIEWED: 1 (1M)

Revision v6 of 7 in this series; 1 review trailer.

Revisions (7)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]
  6. v6 current
  7. v7 [diff vs current]

[net-next PATCH v6 11/16] dt-bindings: net: dsa: qca8k: document support for qca8328

From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-10-13 01:17:10
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

QCA8328 is the bigger brother of qca8327. Document the new compatible
binding and add some information to understand the various switch
compatible.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 Documentation/devicetree/bindings/net/dsa/qca8k.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 9e6748ec13da..f057117764af 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -3,9 +3,10 @@
 Required properties:
 
 - compatible: should be one of:
-    "qca,qca8327"
-    "qca,qca8334"
-    "qca,qca8337"
+    "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
+    "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package
+    "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package
+    "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
 
 - #size-cells: must be 0
 - #address-cells: must be 1
-- 
2.32.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help