[PATCH] net: phy: micrel: make *-skew-ps check more lenient
From: Matthias Schiffer <hidden>
Date: 2021-10-12 10:34:41
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
It seems reasonable to fine-tune only some of the skew values when using one of the rgmii-*id PHY modes, and even when all skew values are specified, using the correct ID PHY mode makes sense for documentation purposes. Such a configuration also appears in the binding docs in Documentation/devicetree/bindings/net/micrel-ksz90x1.txt, so the driver should not warn about it. Signed-off-by: Matthias Schiffer <redacted> --- drivers/net/phy/micrel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index c330a5a9f665..03e58ebf68af 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c@@ -863,9 +863,9 @@ static int ksz9031_config_init(struct phy_device *phydev) MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, tx_data_skews, 4, &update); - if (update && phydev->interface != PHY_INTERFACE_MODE_RGMII) + if (update && !phy_interface_is_rgmii(phydev)) phydev_warn(phydev, - "*-skew-ps values should be used only with phy-mode = \"rgmii\"\n"); + "*-skew-ps values should be used only with RGMII PHY modes\n"); /* Silicon Errata Sheet (DS80000691D or DS80000692D): * When the device links in the 1000BASE-T slave mode only,
--
2.17.1