[PATCH v1 13/15] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer
From: Dmitry Baryshkov <hidden>
Date: 2021-10-06 03:56:12
Also in:
linux-arm-msm, linux-bluetooth, linux-mmc, linux-wireless, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
On DB845c board WiFi/BT chip can use both RF channels/antennas, so add vddch1-supply property. Signed-off-by: Dmitry Baryshkov <redacted> --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6a34a959a91..0f3214c60980 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts@@ -342,6 +342,12 @@ vreg_l21a_2p95: ldo21 { regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>;
@@ -637,6 +643,7 @@ &qca_pwrseq { vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; }; &sdhc_2 {
--
2.33.0