[PATCH v8 03/24] wfx: add Makefile/Kconfig
From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
Date: 2021-10-05 13:56:05
Also in:
linux-devicetree, linux-mmc, linux-wireless, lkml
Subsystem:
silicon labs wireless drivers (for wfxxx series), the rest · Maintainers:
Jérôme Pouiller, Linus Torvalds
From: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> --- drivers/net/wireless/silabs/wfx/Kconfig | 13 ++++++++++++ drivers/net/wireless/silabs/wfx/Makefile | 26 ++++++++++++++++++++++++ 2 files changed, 39 insertions(+) create mode 100644 drivers/net/wireless/silabs/wfx/Kconfig create mode 100644 drivers/net/wireless/silabs/wfx/Makefile
diff --git a/drivers/net/wireless/silabs/wfx/Kconfig b/drivers/net/wireless/silabs/wfx/Kconfig
new file mode 100644
index 000000000000..835a855409d8
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/Kconfig@@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0-only +config WFX + tristate "Silicon Labs wireless chips WF200 and further" + depends on MAC80211 + depends on MMC || !MMC # do not allow WFX=y if MMC=m + depends on (SPI || MMC) + help + This is a driver for Silicons Labs WFxxx series (WF200 and further) + chipsets. This chip can be found on SPI or SDIO buses. + + Silabs does not use a reliable SDIO vendor ID. So, to avoid conflicts, + the driver won't probe the device if it is not also declared in the + Device Tree.
diff --git a/drivers/net/wireless/silabs/wfx/Makefile b/drivers/net/wireless/silabs/wfx/Makefile
new file mode 100644
index 000000000000..ae94c6552d77
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/Makefile@@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# Necessary for CREATE_TRACE_POINTS +CFLAGS_debug.o = -I$(src) + +wfx-y := \ + bh.o \ + hwio.o \ + fwio.o \ + hif_tx_mib.o \ + hif_tx.o \ + hif_rx.o \ + queue.o \ + data_tx.o \ + data_rx.o \ + scan.o \ + sta.o \ + key.o \ + main.o \ + sta.o \ + debug.o +wfx-$(CONFIG_SPI) += bus_spi.o +# When CONFIG_MMC == m, append to 'wfx-y' (and not to 'wfx-m') +wfx-$(subst m,y,$(CONFIG_MMC)) += bus_sdio.o + +obj-$(CONFIG_WFX) += wfx.o
--
2.33.0