[PATCH net-next 3/3] net: mvneta: drop use of phylink_helper_basex_speed()
From: Russell King (Oracle) <hidden>
Date: 2021-10-27 09:03:59
Subsystem:
marvell mvneta ethernet driver, networking drivers, the rest · Maintainers:
Marcin Wojtas, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function, and we can also get rid of our hack to indicate both 1000base-X and 2500base-X if the comphy is present to make that work. Remove this hack and use of phylink_helper_basex_speed(). Signed-off-by: Russell King (Oracle) <redacted> --- drivers/net/ethernet/marvell/mvneta.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 446cdd496f1b..5a7bdca22a63 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c@@ -3823,8 +3823,6 @@ static void mvneta_validate(struct phylink_config *config, unsigned long *supported, struct phylink_link_state *state) { - struct net_device *ndev = to_net_dev(config->dev); - struct mvneta_port *pp = netdev_priv(ndev); __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; /* We only support QSGMII, SGMII, 802.3z and RGMII modes.
@@ -3846,11 +3844,12 @@ static void mvneta_validate(struct phylink_config *config, phylink_set(mask, Pause); /* Half-duplex at speeds higher than 100Mbit is unsupported */ - if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) { + if (state->interface != PHY_INTERFACE_MODE_2500BASEX) { phylink_set(mask, 1000baseT_Full); phylink_set(mask, 1000baseX_Full); } - if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) { + + if (state->interface == PHY_INTERFACE_MODE_2500BASEX) { phylink_set(mask, 2500baseT_Full); phylink_set(mask, 2500baseX_Full); }
@@ -3865,11 +3864,6 @@ static void mvneta_validate(struct phylink_config *config, linkmode_and(supported, supported, mask); linkmode_and(state->advertising, state->advertising, mask); - - /* We can only operate at 2500BaseX or 1000BaseX. If requested - * to advertise both, only report advertising at 2500BaseX. - */ - phylink_helper_basex_speed(state); } static void mvneta_mac_pcs_get_state(struct phylink_config *config,
--
2.30.2