[net-next 04/13] net/mlx5: Introduce new uplink destination type
flat view
From: Saeed Mahameed <saeed@kernel.org>
Date: 2021-10-19 03:21:02
Subsystem:
mellanox mlx5 ib driver, mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers:
Leon Romanovsky, Saeed Mahameed, Tariq Toukan, Mark Bloch, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Maor Gottlieb <redacted> The uplink destination type should be used in rules to steer the packet to the uplink when the device is in steering based LAG mode. Signed-off-by: Maor Gottlieb <redacted> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- .../net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.c | 3 +++ drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c | 8 +++++++- include/linux/mlx5/mlx5_ifc.h | 1 + 3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.c
index 87d65f6b5310..7841ef6c193c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fs_tracepoint.c@@ -235,6 +235,9 @@ const char *parse_fs_dst(struct trace_seq *p, const char *ret = trace_seq_buffer_ptr(p); switch (dst->type) { + case MLX5_FLOW_DESTINATION_TYPE_UPLINK: + trace_seq_printf(p, "uplink\n"); + break; case MLX5_FLOW_DESTINATION_TYPE_VPORT: trace_seq_printf(p, "vport=%u\n", dst->vport.num); break;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
index 2c82dc118460..750b21124a1a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_cmd.c@@ -577,8 +577,8 @@ static int mlx5_cmd_set_fte(struct mlx5_core_dev *dev, case MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE: id = dst->dest_attr.ft->id; break; + case MLX5_FLOW_DESTINATION_TYPE_UPLINK: case MLX5_FLOW_DESTINATION_TYPE_VPORT: - id = dst->dest_attr.vport.num; MLX5_SET(dest_format_struct, in_dests, destination_eswitch_owner_vhca_id_valid, !!(dst->dest_attr.vport.flags &
@@ -586,6 +586,12 @@ static int mlx5_cmd_set_fte(struct mlx5_core_dev *dev, MLX5_SET(dest_format_struct, in_dests, destination_eswitch_owner_vhca_id, dst->dest_attr.vport.vhca_id); + if (type == MLX5_FLOW_DESTINATION_TYPE_UPLINK) { + /* destination_id is reserved */ + id = 0; + break; + } + id = dst->dest_attr.vport.num; if (extended_dest && dst->dest_attr.vport.pkt_reformat) { MLX5_SET(dest_format_struct, in_dests,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 8f41145bc6ef..09e43019d877 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h@@ -1766,6 +1766,7 @@ enum mlx5_flow_destination_type { MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE = 0x1, MLX5_FLOW_DESTINATION_TYPE_TIR = 0x2, MLX5_FLOW_DESTINATION_TYPE_FLOW_SAMPLER = 0x6, + MLX5_FLOW_DESTINATION_TYPE_UPLINK = 0x8, MLX5_FLOW_DESTINATION_TYPE_PORT = 0x99, MLX5_FLOW_DESTINATION_TYPE_COUNTER = 0x100,
--
2.31.1