[PATCH v2 net-next 3/5] net: dpaa2: add support for manual setup of IRQ coalesing
From: Ioana Ciornei <ioana.ciornei@nxp.com>
Date: 2021-10-15 09:01:53
Subsystem:
dpaa2 ethernet driver, networking drivers, the rest · Maintainers:
Ioana Ciornei, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Use the newly exported dpio driver API to manually configure the IRQ coalescing parameters requested by the user. The .get_coalesce() and .set_coalesce() net_device callbacks are implemented and directly export or setup the rx-usecs on all the channels configured. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> --- Changes in v2: - none .../ethernet/freescale/dpaa2/dpaa2-ethtool.c | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
index 2da5f881f630..69a6860e11fa 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c@@ -820,7 +820,56 @@ static int dpaa2_eth_set_tunable(struct net_device *net_dev, return err; } +static int dpaa2_eth_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ic, + struct kernel_ethtool_coalesce *kernel_coal, + struct netlink_ext_ack *extack) +{ + struct dpaa2_eth_priv *priv = netdev_priv(dev); + struct dpaa2_io *dpio = priv->channel[0]->dpio; + + dpaa2_io_get_irq_coalescing(dpio, &ic->rx_coalesce_usecs); + + return 0; +} + +static int dpaa2_eth_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ic, + struct kernel_ethtool_coalesce *kernel_coal, + struct netlink_ext_ack *extack) +{ + struct dpaa2_eth_priv *priv = netdev_priv(dev); + struct dpaa2_io *dpio; + u32 prev_rx_usecs; + int i, j, err; + + /* Keep track of the previous value, just in case we fail */ + dpio = priv->channel[0]->dpio; + dpaa2_io_get_irq_coalescing(dpio, &prev_rx_usecs); + + /* Setup new value for rx coalescing */ + for (i = 0; i < priv->num_channels; i++) { + dpio = priv->channel[i]->dpio; + + err = dpaa2_io_set_irq_coalescing(dpio, ic->rx_coalesce_usecs); + if (err) + goto restore_rx_usecs; + } + + return 0; + +restore_rx_usecs: + for (j = 0; j < i; j++) { + dpio = priv->channel[j]->dpio; + + dpaa2_io_set_irq_coalescing(dpio, prev_rx_usecs); + } + + return err; +} + const struct ethtool_ops dpaa2_ethtool_ops = { + .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS, .get_drvinfo = dpaa2_eth_get_drvinfo, .nway_reset = dpaa2_eth_nway_reset, .get_link = ethtool_op_get_link,
@@ -836,4 +885,6 @@ const struct ethtool_ops dpaa2_ethtool_ops = { .get_ts_info = dpaa2_eth_get_ts_info, .get_tunable = dpaa2_eth_get_tunable, .set_tunable = dpaa2_eth_set_tunable, + .get_coalesce = dpaa2_eth_get_coalesce, + .set_coalesce = dpaa2_eth_set_coalesce, };
--
2.31.1