[PATCH net-next 2/2] dt-bindings: net: dsa: document felix family in dsa-tag-protocol
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: 2021-10-09 12:28:06
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Vitesse/Microsemi/Microchip family of switches supported by the Felix DSA driver is capable of selecting between the native tagging protocol and ocelot-8021q. This is necessary to enable flow control on the CPU port. Certain systems where these switches are integrated use the switch as a port multiplexer, so the termination throughput is paramount. Changing the tagging protocol at runtime is possible for these systems, but since it is known beforehand that one tagging protocol will provide strictly better performance than the other, just allow them to specify the preference in the device tree. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- Documentation/devicetree/bindings/net/dsa/dsa.yaml | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 51f243244f7b..224cfa45de9a 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml@@ -78,6 +78,9 @@ patternProperties: enum: - dsa - edsa + - ocelot + - ocelot-8021q + - seville phy-handle: true
--
2.25.1