[PATCH net-next v2 5/6] ethtool: Add transceiver module extended state
From: Ido Schimmel <hidden>
Date: 2021-10-06 10:47:50
Subsystem:
documentation, networking [ethtool], networking [general], the rest · Maintainers:
Jonathan Corbet, Andrew Lunn, Jakub Kicinski, "David S. Miller", Eric Dumazet, Paolo Abeni, Linus Torvalds
From: Ido Schimmel <idosch@nvidia.com> Add an extended state and sub-state to describe link issues related to transceiver modules. The 'ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY' extended sub-state tells user space that port is unable to gain a carrier because the CMIS Module State Machine did not reach the ModuleReady (Fully Operational) state. For example, if the module is stuck at ModuleLowPwr or ModuleFault state. In case of the latter, user space can read the fault reason from the module's EEPROM and potentially reset it. Signed-off-by: Ido Schimmel <idosch@nvidia.com> --- Documentation/networking/ethtool-netlink.rst | 10 ++++++++++ include/linux/ethtool.h | 1 + include/uapi/linux/ethtool.h | 6 ++++++ 3 files changed, 17 insertions(+)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index d6fd4b2e243c..7b598c7e3912 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst@@ -528,6 +528,8 @@ Link extended states: power required from cable or module ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated + + ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue ================================================ ============================================ Link extended substates:
@@ -621,6 +623,14 @@ Link extended substates: ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure =================================================== ============================================ + Transceiver module issue substates: + + =================================================== ============================================ + ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach + the ModuleReady state. For example, if the + module is stuck at ModuleFault state + =================================================== ============================================ + DEBUG_GET =========
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 9adf8d2c3144..845a0ffc16ee 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h@@ -94,6 +94,7 @@ struct ethtool_link_ext_state_info { enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch; enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity; enum ethtool_link_ext_substate_cable_issue cable_issue; + enum ethtool_link_ext_substate_module module; u8 __link_ext_substate; }; };
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 6de61d53ca5d..a2223b685451 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h@@ -603,6 +603,7 @@ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE, ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, ETHTOOL_LINK_EXT_STATE_OVERHEAT, + ETHTOOL_LINK_EXT_STATE_MODULE, }; /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */
@@ -649,6 +650,11 @@ enum ethtool_link_ext_substate_cable_issue { ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE, }; +/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */ +enum ethtool_link_ext_substate_module { + ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1, +}; + #define ETH_GSTRING_LEN 32 /**
--
2.31.1