This implements fast aging per-port using the special "security"
register, which will flush any learned L2 LUT entries on a port.
The vendor API just enabled setting and clearing this bit, so
we set it to age out any entries on the port and then we clear
it again.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <redacted>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Walleij <redacted>
---
ChangeLog v4->v5:
- Update changelog a bit what else can we do.
ChangeLog v3->v4:
- No changes, rebased on the other patches.
ChangeLog v2->v3:
- Underscore that this only affects learned L2 entries, not
static ones.
ChangeLog v1->v2:
- New patch suggested by Vladimir.
---
drivers/net/dsa/rtl8366rb.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c
index b3056064b937..c78e4220ddd1 100644
--- a/drivers/net/dsa/rtl8366rb.c
+++ b/drivers/net/dsa/rtl8366rb.c
@@ -1308,6 +1308,19 @@ rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
return 0;
}
+static void
+rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct realtek_smi *smi = ds->priv;
+
+ /* This will age out any learned L2 entries */
+ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL,
+ BIT(port), BIT(port));
+ /* Restore the normal state of things */
+ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL,
+ BIT(port), 0);
+}
+
static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct realtek_smi *smi = ds->priv;@@ -1720,6 +1733,7 @@ static const struct dsa_switch_ops rtl8366rb_switch_ops = {
.port_disable = rtl8366rb_port_disable,
.port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
.port_bridge_flags = rtl8366rb_port_bridge_flags,
+ .port_fast_age = rtl8366rb_port_fast_age,
.port_change_mtu = rtl8366rb_change_mtu,
.port_max_mtu = rtl8366rb_max_mtu,
};--
2.31.1