Re: [Intel-wired-lan] Intel I350 regression 5.10 -> 5.14 ("The NVM Checksum Is Not Valid") [8086:1521]
From: Sasha Neftin <hidden>
Date: 2021-10-05 06:51:00
Also in:
intel-wired-lan
On 10/5/2021 02:39, Hisashi T Fujinaka wrote:
On Mon, 4 Oct 2021, Jakub Kicinski wrote:quoted
On Mon, 04 Oct 2021 15:06:31 +0200 Andreas K. Huettel wrote:quoted
Dear all, I hope this is the right place to ask, if not please advise me where to go.Adding intel-wired-lan@lists.osuosl.org and Sasha as well.quoted
I have a new Dell machine with both an Intel on-board ethernet controller ([8086:15f9]) and an additional 2-port extension card ([8086:1521]). The second adaptor, a "DeLock PCIe 2xGBit", worked fine as far as I could see with Linux 5.10.59, but fails to initialize with Linux 5.14.9. dilfridge ~ # lspci -nn [...] 01:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev ff) 01:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev ff) [...] dilfridge ~ # dmesg|grep igb [ 2.069286] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.069288] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.069305] igb 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible) [ 2.069624] igb 0000:01:00.0 0000:01:00.0 (uninitialized): PCIe link lost [ 2.386659] igb 0000:01:00.0: PHY reset is blocked due to SOL/IDER session. [ 4.115500] igb 0000:01:00.0: The NVM Checksum Is Not Valid [ 4.133807] igb: probe of 0000:01:00.0 failed with error -5 [ 4.133820] igb 0000:01:00.1: can't change power state from D3cold to D0 (config space inaccessible) [ 4.134072] igb 0000:01:00.1 0000:01:00.1 (uninitialized): PCIe link lost [ 4.451602] igb 0000:01:00.1: PHY reset is blocked due to SOL/IDER session. [ 6.180123] igb 0000:01:00.1: The NVM Checksum Is Not Valid [ 6.188631] igb: probe of 0000:01:00.1 failed with error -5 Any advice on how to proceed? Willing to test patches and provide additional debug info.Sorry to reply from a non-Intel account. I would suggest first contacting Dell, and then contacting DeLock. This sounds like an issue with motherboard firmware and most of what I can help with would be with the driver. I think the issues are probably before things get to the driver.
Agree. The driver starts work when the PCIe link in L0. Please, check with Dell/DeLock what is PCIe link status and enumeration process finished as properly.(probably you will need PCIe sniffer)
Todd Fujinaka [off-list ref] _______________________________________________ Intel-wired-lan mailing list Intel-wired-lan@osuosl.org https://lists.osuosl.org/mailman/listinfo/intel-wired-lan