[PATCH 2/2] net: ipv6: use ipv6-y directly instead of ipv6-objs
From: Masahiro Yamada <masahiroy@kernel.org>
Date: 2021-09-27 14:29:49
Also in:
lkml
Subsystem:
networking [general], the rest · Maintainers:
"David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Kbuild supports <modname>-y as well as <modname>-objs. This simplifies the Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> --- net/ipv6/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile
index 061b74d5563d..3036a45e8a1e 100644
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile@@ -5,14 +5,14 @@ obj-$(CONFIG_IPV6) += ipv6.o -ipv6-objs := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \ +ipv6-y := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \ addrlabel.o \ route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o udplite.o \ raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o ping.o \ exthdrs.o datagram.o ip6_flowlabel.o inet6_connection_sock.o \ udp_offload.o seg6.o fib6_notifier.o rpl.o ioam6.o -ipv6-$(CONFIG_SYSCTL) = sysctl_net_ipv6.o +ipv6-$(CONFIG_SYSCTL) += sysctl_net_ipv6.o ipv6-$(CONFIG_IPV6_MROUTE) += ip6mr.o ipv6-$(CONFIG_XFRM) += xfrm6_policy.o xfrm6_state.o xfrm6_input.o \
@@ -27,8 +27,6 @@ ipv6-$(CONFIG_IPV6_SEG6_HMAC) += seg6_hmac.o ipv6-$(CONFIG_IPV6_RPL_LWTUNNEL) += rpl_iptunnel.o ipv6-$(CONFIG_IPV6_IOAM6_LWTUNNEL) += ioam6_iptunnel.o -ipv6-objs += $(ipv6-y) - obj-$(CONFIG_INET6_AH) += ah6.o obj-$(CONFIG_INET6_ESP) += esp6.o obj-$(CONFIG_INET6_ESP_OFFLOAD) += esp6_offload.o
--
2.30.2