Re: [PATCH net-next 0/5] net: phy: broadcom: IDDQ-SR mode

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Mon, 20 Sep 2021 14:54:13 -0700 you wrote:

This patch series adds support for the IDDQ with soft recovery mode
which allows power savings of roughly 150mW compared to a simple
BMCR.PDOWN power off (called standby power down in Broadcom datasheets).

In order to leverage these modes we add a new PHY driver flags for
drivers to opt-in for that behavior, the PHY driver is modified to do
the appropriate programming and the PHYs on which this was tested get
updated to have an appropriate suspend/resume set of functions.

[...]

Here is the summary with links:
  - [net-next,1/5] net: phy: broadcom: Add IDDQ-SR mode
    https://git.kernel.org/netdev/net-next/c/d6da08ed1425
  - [net-next,2/5] net: phy: broadcom: Wire suspend/resume for BCM50610 and BCM50610M
    https://git.kernel.org/netdev/net-next/c/38b6a9073007
  - [net-next,3/5] net: phy: broadcom: Utilize appropriate suspend for BCM54810/11
    https://git.kernel.org/netdev/net-next/c/72e78d22e152
  - [net-next,4/5] net: bcmgenet: Request APD, DLL disable and IDDQ-SR
    https://git.kernel.org/netdev/net-next/c/c3a4c69360ab
  - [net-next,5/5] net: dsa: bcm_sf2: Request APD, DLL disable and IDDQ-SR
    https://git.kernel.org/netdev/net-next/c/4972ce720101

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html