[PATCH v1 net] net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFG

When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
 drivers/net/ethernet/mscc/ocelot.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 08be0440af28..729ba826ba17 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c

@@ -563,12 +563,6 @@ void ocelot_phylink_mac_link_up(struct ocelot *ocelot, int port,
 	ocelot_port_writel(ocelot_port, DEV_MAC_ENA_CFG_RX_ENA |
 			   DEV_MAC_ENA_CFG_TX_ENA, DEV_MAC_ENA_CFG);
 
-	/* Take MAC, Port, Phy (intern) and PCS (SGMII/Serdes) clock out of
-	 * reset
-	 */
-	ocelot_port_writel(ocelot_port, DEV_CLOCK_CFG_LINK_SPEED(speed),
-			   DEV_CLOCK_CFG);
-
 	/* Core: Enable port for frame transfer */
 	ocelot_fields_write(ocelot, port,
 			    QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);

-- 
2.25.1

On Wed, Sep 15, 2021 at 06:23:40PM -0700, Colin Foster wrote:

When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>