[PATCH net-next] net: phy: at803x: add support for qca 8327 internal phy
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-09-14 07:12:14
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Rosen Penev <redacted> --- drivers/net/phy/at803x.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index bdac087058b2..19a426aa4ede 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -1420,6 +1420,19 @@ static struct phy_driver at803x_driver[] = { .get_sset_count = at803x_get_sset_count, .get_strings = at803x_get_strings, .get_stats = at803x_get_stats, +}, { + /* QCA8327 */ + .phy_id = QCA8327_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "QCA PHY 8327", + /* PHY_GBIT_FEATURES */ + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, }, }; module_phy_driver(at803x_driver);
--
2.32.0