Re: [PATCH net-next 3/6 v7] net: dsa: rtl8366rb: Rewrite weird VLAN filering enablement
flat view
From: DENG Qingfang <dqfext@gmail.com>
Date: 2021-09-27 04:42:53
On Sun, Sep 26, 2021 at 12:59:26AM +0200, Linus Walleij wrote:
Implement the correct callback: we have two registers dealing with filtering on the RTL9366RB, so we implement an ASIC-specific
Typo
callback and implement filering using the register bit that makes the switch drop frames if the port is not in the VLAN member set. The DSA documentation Documentation/networking/switchdev.rst states: When the bridge has VLAN filtering enabled and a PVID is not configured on the ingress port, untagged and 802.1p tagged packets must be dropped. When the bridge has VLAN filtering enabled and a PVID exists on the ingress port, untagged and priority-tagged packets must be accepted and forwarded according to the bridge's port membership of the PVID VLAN. When the bridge has VLAN filtering disabled, the presence/lack of a PVID should not influence the packet forwarding decision. To comply with this, we add two arrays of bool in the RTL8366RB state that keeps track of if filtering and PVID is enabled or
You can use dsa_port_is_vlan_filtering() instead.
quoted hunk ↗ jump to hunk
static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {@@ -933,11 +952,13 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (ret) return ret; - /* Discard VLAN tagged packets if the port is not a member of - * the VLAN with which the packets is associated. - */ + /* Accept all packets by default, we enable filtering on-demand */ + ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, + 0); + if (ret) + return ret; ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, - RTL8366RB_PORT_ALL); + 0); if (ret) return ret;@@ -1209,6 +1230,53 @@ rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port, RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0); } +/** + * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames + * @smi: SMI state container + * @port: the port to drop untagged and C-tagged frames on + * @drop: whether to drop or pass untagged and C-tagged frames + */ +static int rtl8366rb_drop_untagged(struct realtek_smi *smi, int port, bool drop) +{ + return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, + RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port), + drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0); +} + +static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366rb *rb; + int ret;
Can standalone ports or VLAN-unaware bridges send/receive VLAN-tagged frames as is? If not, please take a look at rtl8368s_setAsicVlanKeepCtagFormat function in the vendor driver. Set the registers to all 1's in setup function, and change them here.
quoted hunk ↗ jump to hunk
+ + rb = smi->chip_data; + + dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port, + vlan_filtering ? "enable" : "disable"); + + /* If the port is not in the member set, the frame will be dropped */ + ret = regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, + BIT(port), vlan_filtering ? BIT(port) : 0); + if (ret) + return ret; + + /* Keep track if filtering is enabled on each port */ + rb->vlan_filtering[port] = vlan_filtering; + + /* If VLAN filtering is enabled and PVID is also enabled, we must + * not drop any untagged or C-tagged frames. If we turn off VLAN + * filtering on a port, we need ti accept any frames.
Typo
quoted hunk ↗ jump to hunk
+ */ + if (vlan_filtering) + ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]); + else + ret = rtl8366rb_drop_untagged(smi, port, false);
Can be simplified as rtl8366rb_drop_untagged(smi, port, vlan_filtering && !rb->pvid_enabled[port]);
quoted hunk ↗ jump to hunk
+ + return ret; +}