[PATCH net-next 3/4] net: dsa: b53: Improve flow control setup on BCM5301x
From: Rafał Miłecki <zajec5@gmail.com>
Date: 2021-09-16 12:04:15
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
From: Rafał Miłecki <rafal@milecki.pl> According to the Broadcom's reference driver flow control needs to be enabled for any CPU switch port (5, 7 or 8 - depending on which one is used). Current code makes it work only for the port 5. Use dsa_is_cpu_port() which solved that problem. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- drivers/net/dsa/b53/b53_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index ca84e32baca0..13f337a102ba 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c@@ -1222,7 +1222,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port, return; /* Enable flow control on BCM5301x's CPU port */ - if (is5301x(dev) && port == dev->cpu_port) + if (is5301x(dev) && dsa_is_cpu_port(ds, port)) tx_pause = rx_pause = true; if (phydev->pause) {
--
2.26.2