Thread (20 messages) flat view 20 messages, 2 authors, 2021-09-15
STALE1763d

[PATCH net-next 14/18] ptp: ocp: Add second GNSS device

From: Jonathan Lemon <hidden>
Date: 2021-09-15 02:17:03
Subsystem: networking drivers, opencompute ptp clock driver, ptp hardware clock support, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vadim Fedorenko, Richard Cochran, Linus Torvalds

Upcoming boards may have a second GNSS receiver, getting information
from a different constellation than the first receiver, which provides
some measure of anti-spoofing.

Expose the sysfs attribute for this device, if detected.

Signed-off-by: Jonathan Lemon <redacted>
---
 drivers/ptp/ptp_ocp.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index 74b5561fbdae..d0e3096f53f6 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -232,6 +232,7 @@ struct ptp_ocp {
 	int			id;
 	int			n_irqs;
 	int			gnss_port;
+	int			gnss2_port;
 	int			mac_port;	/* miniature atomic clock */
 	int			nmea_port;
 	u8			serial[6];
@@ -286,8 +287,8 @@ static int ptp_ocp_ts_enable(void *priv, bool enable);
  * 0: N/C
  * 1: TS0
  * 2: TS1
- * 3: GPS
- * 4: GPS2 (n/c)
+ * 3: GNSS
+ * 4: GNSS2
  * 5: MAC
  * 6: TS2
  * 7: I2C controller
@@ -384,6 +385,10 @@ static struct ocp_resource ocp_fb_resource[] = {
 		OCP_SERIAL_RESOURCE(gnss_port),
 		.offset = 0x00160000 + 0x1000, .irq_vec = 3,
 	},
+	{
+		OCP_SERIAL_RESOURCE(gnss2_port),
+		.offset = 0x00170000 + 0x1000, .irq_vec = 4,
+	},
 	{
 		OCP_SERIAL_RESOURCE(mac_port),
 		.offset = 0x00180000 + 0x1000, .irq_vec = 5,
@@ -2100,6 +2105,7 @@ ptp_ocp_device_init(struct ptp_ocp *bp, struct pci_dev *pdev)
 	bp->ptp_info = ptp_ocp_clock_info;
 	spin_lock_init(&bp->lock);
 	bp->gnss_port = -1;
+	bp->gnss2_port = -1;
 	bp->mac_port = -1;
 	bp->nmea_port = -1;
 	bp->pdev = pdev;
@@ -2163,6 +2169,10 @@ ptp_ocp_complete(struct ptp_ocp *bp)
 		sprintf(buf, "ttyS%d", bp->gnss_port);
 		ptp_ocp_link_child(bp, buf, "ttyGNSS");
 	}
+	if (bp->gnss2_port != -1) {
+		sprintf(buf, "ttyS%d", bp->gnss2_port);
+		ptp_ocp_link_child(bp, buf, "ttyGNSS2");
+	}
 	if (bp->mac_port != -1) {
 		sprintf(buf, "ttyS%d", bp->mac_port);
 		ptp_ocp_link_child(bp, buf, "ttyMAC");
@@ -2241,6 +2251,7 @@ ptp_ocp_info(struct ptp_ocp *bp)
 				 ver >> 16);
 	}
 	ptp_ocp_serial_info(dev, "GNSS", bp->gnss_port, 115200);
+	ptp_ocp_serial_info(dev, "GNSS2", bp->gnss2_port, 115200);
 	ptp_ocp_serial_info(dev, "MAC", bp->mac_port, 57600);
 	if (bp->nmea_out && bp->nmea_port != -1) {
 		int baud = -1;
@@ -2281,6 +2292,8 @@ ptp_ocp_detach(struct ptp_ocp *bp)
 		ptp_ocp_unregister_ext(bp->pps);
 	if (bp->gnss_port != -1)
 		serial8250_unregister_port(bp->gnss_port);
+	if (bp->gnss2_port != -1)
+		serial8250_unregister_port(bp->gnss2_port);
 	if (bp->mac_port != -1)
 		serial8250_unregister_port(bp->mac_port);
 	if (bp->nmea_port != -1)
-- 
2.31.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help