Re: [PATCH v3 net-next 5/8] net: dsa: felix: support psfp filter on vsc9959

On Tue, Aug 31, 2021 at 09:59:11AM +0000, Xiaoliang Yang wrote:

On Tue, Aug 31, 2021 at 17:18:00PM +0300, Vladimir Oltean wrote:

quoted

quoted

quoted

quoted

I think in previous versions you were automatically installing a
static MAC table entry when one was not present (either it was
absent, or the entry was dynamically learned). Why did that change?

The PSFP gate and police action are set on ingress port, and "
tc-filter" has no parameter to set the forward port for the filtered
stream. And I also think that adding a FDB mac entry in tc-filter
command is not good.

Fair enough, but if that's what you want, we'll need to think a lot
harder about how this needs to be modeled.

Would you not have to protect against a 'bridge fdb del' erasing your
MAC table entry after you've set up the TSN stream on it?

Right now, DSA does not even call the driver's .port_fdb_del method
from atomic context, just from deferred work context. So even if you
wanted to complain and say "cannot remove FDB entry until SFID stops
pointing at it", that would not be possible with today's code structure.

And what would you do if the bridge wants to delete the FDB entry
irrevocably, like when the user wants to delete the bridge in its
entirety? You would still remain with filters in tc which are not
backed by any MAC table entry.

Hmm..
Either the TSN standards for PSFP and FRER are meant to be implemented
within the bridge driver itself, and not as part of tc, or the
Microchip implementation is very weird for wiring them into the bridge MAC

table.

quoted

Microchip people, any comments?

In sja1105's implementation of PSFP (which is not standard-compliant as it is
based on TTEthernet, but makes more sense anyway), the Virtual Links (SFIDs
here) are not based on the FDB table, but match only on the given source port.
They behave much more like ACL entries.
The way I've modeled them in Linux was to force the user to offload multiple
actions for the same tc-filter, both a redirect action and a police/gate action.
https://www.kernel.org/doc/html/latest/networking/dsa/sja1105.html#time-b
ased-ingress-policing

I'm not saying this helps you, I'm just saying maybe the Microchip
implementation is strange, but then again, I might be looking the wrong way
at it.

Yes, Using redirect action can give PSFP filter a forward port to add
MAC table entry. But it also has the issue that when using "bridge fdb
del" to delete the MAC entry will cause the tc-filter rule not
working.

We need to define the expected behavior.

As far as the 802.1Q-2018 spec is concerned, there is no logical
dependency between the FDB lookup and the PSFP streams. But there seems
to be no explicit text that forbids it either, though.

If you install a tc-redirect rule and offload it as a bridge FDB entry,
it needs to behave like a tc-redirect rule and not a bridge FDB entry.
So it only needs to match on the intended source port. I don't believe
that is possible. If it is, let's do that.

To me, putting PSFP inside the bridge driver is completely outside of
the question. There is no evidence that it belongs there, and there are
switch implementations from other vendors where the FDB lookup process
is completely independent from the Qci stream identification process.
Anyway, this strategy of combining the two could only work for the NULL
stream identifiers in the first place (MAC DA + VLAN ID), not for the
others (IP Stream identification etc etc).

So what remains, if nothing else is possible, is to require the user to
manage the bridge FDB entries, and make sure that the kernel side is
sane, and does not remain with broken data structures. That is going to
be a PITA both for the user and for the kernel side, because we are
going to make the tc-flower filters effectively depend upon the bridge
state.

Let's wait for some feedback from Microchip engineers, how they
envisioned this to be integrated with operating systems.