[net-next PATCH] octeontx2-af: Use NDC TX for transmit packet data
From: Geetha sowjanya <gakula@marvell.com>
Date: 2021-08-30 12:55:28
Also in:
lkml
Subsystem:
marvell octeontx2 rvu admin function driver, networking drivers, the rest · Maintainers:
Sunil Goutham, Ratheesh Kannoth, Geetha sowjanya, Subbaraya Sundeep, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
For better performance set hardware to use NDC TX for reading packet data specified NIX_SEND_SG_S. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> --- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 3 +++ drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h | 1 + 2 files changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 8f37477e0cb5..9ef4e942e31e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c@@ -4200,6 +4200,9 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw) /* Restore CINT timer delay to HW reset values */ rvu_write64(rvu, blkaddr, NIX_AF_CINT_DELAY, 0x0ULL); + /* For better performance use NDC TX instead of NDC RX for SQ's SQEs" */ + rvu_write64(rvu, blkaddr, NIX_AF_SEB_CFG, 0x1ULL); + if (is_block_implemented(hw, blkaddr)) { err = nix_setup_txschq(rvu, nix_hw, blkaddr); if (err)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 576b037a00f0..21f1ed4e222f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h@@ -263,6 +263,7 @@ #define NIX_AF_SDP_TX_FIFO_STATUS (0x0640) #define NIX_AF_TX_NPC_CAPTURE_CONFIG (0x0660) #define NIX_AF_TX_NPC_CAPTURE_INFO (0x0670) +#define NIX_AF_SEB_CFG (0x05F0) #define NIX_AF_DEBUG_NPC_RESP_DATAX(a) (0x680 | (a) << 3) #define NIX_AF_SMQX_CFG(a) (0x700 | (a) << 16)
--
2.17.1