On Sun, Aug 22, 2021 at 09:31:42PM +0200, Alvin Šipraga wrote:
+/* Table LUT (look-up-table) address register */
+#define RTL8365MB_TABLE_LUT_ADDR_REG 0x0502
+#define RTL8365MB_TABLE_LUT_ADDR_ADDRESS2_MASK 0x4000
+#define RTL8365MB_TABLE_LUT_ADDR_BUSY_FLAG_MASK 0x2000
+#define RTL8365MB_TABLE_LUT_ADDR_HIT_STATUS_MASK 0x1000
+#define RTL8365MB_TABLE_LUT_ADDR_TYPE_MASK 0x0800
+#define RTL8365MB_TABLE_LUT_ADDR_ADDRESS_MASK 0x07FF
FDB/MDB operations should be possible.
+/* Port isolation (forwarding mask) registers */
+#define RTL8365MB_PORT_ISOLATION_REG_BASE 0x08A2
+#define RTL8365MB_PORT_ISOLATION_REG(_physport) \
+ (RTL8365MB_PORT_ISOLATION_REG_BASE + (_physport))
+#define RTL8365MB_PORT_ISOLATION_MASK 0x07FF
Bridge offload should be implemented with these isolation registers.
FYI:
https://cdn.jsdelivr.net/gh/libc0607/Realtek_switch_hacking@files/Realtek_Unmanaged_Switch_ProgrammingGuide.pdf