[PATCH] selftests/bpf: Use kselftest skip code for skipped tests

There are several test cases in the bpf directory are still using
exit 0 when they need to be skipped. Use kselftest framework skip
code instead so it can help us to distinguish the return status.

Criterion to filter out what should be fixed in bpf directory:
  grep -r "exit 0" -B1 | grep -i skip

This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.

Signed-off-by: Po-Hsu Lin <redacted>
---
 tools/testing/selftests/bpf/test_bpftool_build.sh | 5 ++++-
 tools/testing/selftests/bpf/test_xdp_meta.sh      | 5 ++++-
 tools/testing/selftests/bpf/test_xdp_vlan.sh      | 7 +++++--
 3 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_bpftool_build.sh b/tools/testing/selftests/bpf/test_bpftool_build.sh
index ac349a5..b6fab1e 100755
--- a/tools/testing/selftests/bpf/test_bpftool_build.sh
+++ b/tools/testing/selftests/bpf/test_bpftool_build.sh

@@ -1,6 +1,9 @@
 #!/bin/bash
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
 case $1 in
 	-h|--help)
 		echo -e "$0 [-j <n>]"

@@ -22,7 +25,7 @@ KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
 cd $KDIR_ROOT_DIR
 if [ ! -e tools/bpf/bpftool/Makefile ]; then
 	echo -e "skip:    bpftool files not found!\n"
-	exit 0
+	exit $ksft_skip
 fi
 
 ERROR=0

diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh
index 637fcf4..fd3f218 100755
--- a/tools/testing/selftests/bpf/test_xdp_meta.sh
+++ b/tools/testing/selftests/bpf/test_xdp_meta.sh

@@ -1,5 +1,8 @@
 #!/bin/sh
 
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
 cleanup()
 {
 	if [ "$?" = "0" ]; then

@@ -17,7 +20,7 @@ cleanup()
 ip link set dev lo xdp off 2>/dev/null > /dev/null
 if [ $? -ne 0 ];then
 	echo "selftests: [SKIP] Could not run test without the ip xdp support"
-	exit 0
+	exit $ksft_skip
 fi
 set -e
 

diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh
index bb8b0da..1aa7404 100755
--- a/tools/testing/selftests/bpf/test_xdp_vlan.sh
+++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh

@@ -2,6 +2,9 @@
 # SPDX-License-Identifier: GPL-2.0
 # Author: Jesper Dangaard Brouer <hawk@kernel.org>
 
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
 # Allow wrapper scripts to name test
 if [ -z "$TESTNAME" ]; then
     TESTNAME=xdp_vlan

@@ -94,7 +97,7 @@ while true; do
 	    -h | --help )
 		usage;
 		echo "selftests: $TESTNAME [SKIP] usage help info requested"
-		exit 0
+		exit $ksft_skip
 		;;
 	    * )
 		shift

@@ -117,7 +120,7 @@ fi
 ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null
 if [ $? -ne 0 ]; then
 	echo "selftests: $TESTNAME [SKIP] need ip xdp support"
-	exit 0
+	exit $ksft_skip
 fi
 
 # Interactive mode likely require us to cleanup netns

-- 
2.7.4

On Sun, Aug 22, 2021 at 8:12 PM Po-Hsu Lin [off-list ref] wrote:

There are several test cases in the bpf directory are still using
exit 0 when they need to be skipped. Use kselftest framework skip
code instead so it can help us to distinguish the return status.

Criterion to filter out what should be fixed in bpf directory:
  grep -r "exit 0" -B1 | grep -i skip

This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.

Signed-off-by: Po-Hsu Lin <redacted>

Reviewed-By: Dylan Hatch <redacted>

On Mon, Aug 23, 2021 at 05:01 AM CEST, Po-Hsu Lin wrote:

This bit has been fixed a couple days ago by a similar change:

https://lore.kernel.org/bpf/20210820025549.28325-1-lizhijian@cn.fujitsu.com

Would consider making it read-only:

  readonly KSFT_SKIP=4

[...]

On Wed, Aug 25, 2021 at 5:44 PM Jakub Sitnicki [off-list ref] wrote:

On Mon, Aug 23, 2021 at 05:01 AM CEST, Po-Hsu Lin wrote:

quoted

There are several test cases in the bpf directory are still using
exit 0 when they need to be skipped. Use kselftest framework skip
code instead so it can help us to distinguish the return status.

Criterion to filter out what should be fixed in bpf directory:
  grep -r "exit 0" -B1 | grep -i skip

This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.

Signed-off-by: Po-Hsu Lin <redacted>
---
 tools/testing/selftests/bpf/test_bpftool_build.sh | 5 ++++-
 tools/testing/selftests/bpf/test_xdp_meta.sh      | 5 ++++-
 tools/testing/selftests/bpf/test_xdp_vlan.sh      | 7 +++++--
 3 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_bpftool_build.sh b/tools/testing/selftests/bpf/test_bpftool_build.sh
index ac349a5..b6fab1e 100755
--- a/tools/testing/selftests/bpf/test_bpftool_build.sh
+++ b/tools/testing/selftests/bpf/test_bpftool_build.sh

@@ -1,6 +1,9 @@
 #!/bin/bash
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
 case $1 in
      -h|--help)
              echo -e "$0 [-j <n>]"

@@ -22,7 +25,7 @@ KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
 cd $KDIR_ROOT_DIR
 if [ ! -e tools/bpf/bpftool/Makefile ]; then
      echo -e "skip:    bpftool files not found!\n"
-     exit 0
+     exit $ksft_skip
 fi

 ERROR=0

This bit has been fixed a couple days ago by a similar change:

https://lore.kernel.org/bpf/20210820025549.28325-1-lizhijian@cn.fujitsu.com

Hello Jakub,

Thanks for the feedback, I have submit a v2 patch for this:
https://lore.kernel.org/bpf/20210929051250.13831-1-po-hsu.lin@canonical.com/

Cheers

quoted

diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh
index 637fcf4..fd3f218 100755
--- a/tools/testing/selftests/bpf/test_xdp_meta.sh
+++ b/tools/testing/selftests/bpf/test_xdp_meta.sh

@@ -1,5 +1,8 @@
 #!/bin/sh

+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
 cleanup()
 {
      if [ "$?" = "0" ]; then

Would consider making it read-only:

  readonly KSFT_SKIP=4

[...]