Re: [PATCH 1/2] dt-bindings:dp83867:Add binding for the status led
From: Rob Herring <robh@kernel.org>
Date: 2021-08-17 18:48:17
Also in:
linux-devicetree, lkml
On Mon, Aug 09, 2021 at 04:52:13PM +0800, chaochao2021666@163.com wrote:
quoted hunk ↗ jump to hunk
From: Chao Zeng <redacted> The phy status led of each of board maybe different. Provide a method to custom phy status led behavior. Datasheet: http://www.ti.com/product/DP83867IR/datasheet Signed-off-by: Chao Zeng <redacted> --- .../devicetree/bindings/net/ti,dp83867.yaml | 6 ++++++ include/dt-bindings/net/ti-dp83867.h | 18 ++++++++++++++++++ 2 files changed, 24 insertions(+)diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 047d757e8d82..a46a437818f2 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml@@ -106,6 +106,12 @@ properties: Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values. + ti,led-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + This configure the status led. See dt-bindings/net/ti-dp83867.h + for different status led settings,select different configures
There's ongoing discussions about using the LED bindings/subsystem for this type of LED. Rob