Thread (36 messages) 36 messages, 3 authors, 2021-08-20

Re: [PATCH v5 4/7] can: dev: add can_tdc_get_relative_tdco() helper function

flat view

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2021-08-16 11:27:13
Also in: linux-can, lkml

On 15.08.2021 12:32:45, Vincent Mailhol wrote:
quoted hunk ↗ jump to hunk
struct can_tdc::tdco represents the absolute offset from TDCV. Some
controllers use instead an offset relative to the Sample Point (SP)
such that:
| SSP = TDCV + absolute TDCO
|     = TDCV + SP + relative TDCO

Consequently:
| relative TDCO = absolute TDCO - SP

The function can_tdc_get_relative_tdco() allow to retrieve this
relative TDCO value.

CC: Stefan Mätje <Stefan.Maetje@esd.eu>
Signed-off-by: Vincent Mailhol <redacted>
---
 include/linux/can/dev.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 0be982fd22fb..fa75e29182a3 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -93,6 +93,35 @@ static inline bool can_tdc_is_enabled(const struct can_priv *priv)
 	return !!(priv->ctrlmode & CAN_CTRLMODE_TDC_MASK);
 }
 
+/*
+ * can_get_relative_tdco() - TDCO relative to the sample point
+ *
+ * struct can_tdc::tdco represents the absolute offset from TDCV. Some
+ * controllers use instead an offset relative to the Sample Point (SP)
+ * such that:
+ *
+ * SSP = TDCV + absolute TDCO
+ *     = TDCV + SP + relative TDCO
+ *
+ * -+----------- one bit ----------+-- TX pin
+ *  |<--- Sample Point --->|
+ *
+ *                         --+----------- one bit ----------+-- RX pin
+ *  |<-------- TDCV -------->|
+ *                           |<------------------------>| absolute TDCO
+ *                           |<--- Sample Point --->|
+ *                           |                      |<->| relative TDCO
+ *  |<------------- Secondary Sample Point ------------>|
+ */
+static inline s32 can_get_relative_tdco(const struct can_priv *priv)
+{
+	const struct can_bittiming *dbt = &priv->data_bittiming;
+	s32 sample_point_in_tc =  (CAN_SYNC_SEG + dbt->prop_seg +
                                ^^

Only one space. I'll fix the while applying.
quoted hunk ↗ jump to hunk
+				   dbt->phase_seg1) * dbt->brp;
+
+	return (s32)priv->tdc.tdco - sample_point_in_tc;
+}
+
 /* helper to define static CAN controller features at device creation time */
 static inline void can_set_static_ctrlmode(struct net_device *dev,
 					   u32 static_mode)
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help