Thread (8 messages) 8 messages, 3 authors, 2021-08-16

[PATCH v3 2/3] MDIO: Kconfig: Specify more IPQ chipset supported

flat view
STALE1898d

From: Luo Jie <hidden>
Date: 2021-08-12 10:07:27
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: ethernet phy library, networking drivers, the rest · Maintainers: Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v3 (3 revisions archived).

Revisions (3)
  1. v1 re-posted go to this post
  2. v2 [diff against previous]
  3. v3 current [diff against previous]
The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.

Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated
to the IPQ5018 platform.

Signed-off-by: Luo Jie <redacted>
---
 drivers/net/mdio/Kconfig        | 2 +-
 drivers/net/mdio/mdio-ipq4019.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index a94d34cc7dc1..6da1fcb25847 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -172,7 +172,7 @@ config MDIO_IPQ4019
 	depends on COMMON_CLK
 	help
 	  This driver supports the MDIO interface found in Qualcomm
-	  IPQ40xx series Soc-s.
+	  IPQ40xx, IPQ60xx, IPQ807x and IPQ50xx series Soc-s.
 
 config MDIO_IPQ8064
 	tristate "Qualcomm IPQ8064 MDIO interface support"
diff --git a/drivers/net/mdio/mdio-ipq4019.c b/drivers/net/mdio/mdio-ipq4019.c
index e14d437e42a8..14e08b786334 100644
--- a/drivers/net/mdio/mdio-ipq4019.c
+++ b/drivers/net/mdio/mdio-ipq4019.c
@@ -258,6 +258,7 @@ static int ipq4019_mdio_remove(struct platform_device *pdev)
 
 static const struct of_device_id ipq4019_mdio_dt_ids[] = {
 	{ .compatible = "qcom,ipq4019-mdio" },
+	{ .compatible = "qcom,ipq5018-mdio" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ipq4019_mdio_dt_ids);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help