[Resend v1 0/2] net: mdio: Add IPQ MDIO reset related function
flat view
STALE1904d
SUPERSEDED
From: Luo Jie <hidden>
Date: 2021-08-08 12:01:48
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Status: Superseded by v3 (posted 2021-08-12). [go to v3]
Revision v1 (3 revisions archived).
Revisions (3)
- v1 current re-posted current
- v2 [diff against previous]
- v3 [diff against previous]
This patch series add the MDIO reset features, which includes configuring MDIO clock source frequency and indicating CMN_PLL that ethernet LDO has been ready, this ethernet LDO is dedicated in the IPQ5018 platform. Specify more chipset IPQ40xx, IPQ807x, IPQ60xx and IPQ50xx supported by this MDIO driver. The PHY reset with GPIO and PHY reset with reset controller are covered by the phylib code, so remove the PHY reset related code from the initial patch series. Luo Jie (2): net: mdio: Add the reset function for IPQ MDIO driver MDIO: Kconfig: Specify more IPQ chipset supported drivers/net/mdio/Kconfig | 3 ++- drivers/net/mdio/mdio-ipq4019.c | 48 +++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletion(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project