[PATCH v3 2/4] can: c_can: exit c_can_do_tx() early if no frames have been sent
From: Dario Binacchi <hidden>
Date: 2021-08-07 13:09:13
Also in:
linux-can, lkml
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
The c_can_poll() handles RX/TX events unconditionally. It may therefore happen that c_can_do_tx() is called unnecessarily because the interrupt was triggered by the reception of a frame. In these cases, we avoid to execute unnecessary statements and exit immediately. Signed-off-by: Dario Binacchi <redacted> --- (no changes since v1) drivers/net/can/c_can/c_can_main.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/net/can/c_can/c_can_main.c b/drivers/net/can/c_can/c_can_main.c
index 7588f70ca0fe..fec0e3416970 100644
--- a/drivers/net/can/c_can/c_can_main.c
+++ b/drivers/net/can/c_can/c_can_main.c@@ -720,17 +720,18 @@ static void c_can_do_tx(struct net_device *dev) pkts++; } + if (!pkts) + return; + /* Clear the bits in the tx_active mask */ atomic_sub(clr, &priv->tx_active); if (clr & BIT(priv->msg_obj_tx_num - 1)) netif_wake_queue(dev); - if (pkts) { - stats->tx_bytes += bytes; - stats->tx_packets += pkts; - can_led_event(dev, CAN_LED_EVENT_TX); - } + stats->tx_bytes += bytes; + stats->tx_packets += pkts; + can_led_event(dev, CAN_LED_EVENT_TX); } /* If we have a gap in the pending bits, that means we either
--
2.17.1