Re: [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-08-03 08:44:45
Also in:
linux-mips, lkml
On Tue, Aug 03, 2021 at 04:14:35PM +0800, DENG Qingfang wrote:
On Tue, Aug 03, 2021 at 08:54:24AM +0200, Oleksij Rempel wrote:quoted
+ if (dsa_is_cpu_port(ds, port)) { + /* CPU port should be allowed to communicate with all user + * ports. + */ + port_mask = dsa_user_ports(ds); + /* Enable Atheros header on CPU port. This will allow us + * communicate with each port separately + */ + port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN; + } else if (dsa_is_user_port(ds, port)) { + /* User ports should communicate only with the CPU port. + */ + port_mask = BIT(dsa_to_port(ds, port)->cpu_dp->index); + port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;All user ports should start with address learning disabled. To toggle it, implement .port_pre_bridge_flags and .port_bridge_flags.
Ok, thx! Will move it to the separate patch -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |