Re: PHY reset may still be asserted during MDIO probe

On Fri, Jul 09, 2021 at 05:33:36PM +0200, Geert Uytterhoeven wrote:

Hi all,

I'm investigating a network failure after kexec on the Renesas Koelsch
and Salvator-XS development boards, using the sh-eth or ravb driver.

Personally, I've never liked the reset support at PHY device level due
to problems like the one you've identified here. I've tended to use the
bus-level reset in preference to the PHY-level reset, particularly
because when you have multiple PHYs on the bus all sharing a common
reset, it seems to be the most sensible approach - and I see a single
PHY as no different from multiple PHYs on the bus.

However, I can see the argument for using the PHY level, but as you
note, that can create chicken and egg issues. I'm not entirely sure
why we decide to hold a PHY in reset when we've found it but not
started to make use of it - we don't do that with other devices in
the system. Why are PHYs special?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!