Re: [PATCH v2 3/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-07-27 06:31:34
Also in:
linux-devicetree, lkml
On Tue, Jul 13, 2021 at 06:58:30PM +0200, Andrew Lunn wrote:
quoted
+static const int phy_10_features_array[] = { + ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,Does you device implement ETHTOOL_LINK_MODE_10baseT1L_Half_BIT? I'm assuming half duplex is part of the standard?
No, there is no ETHTOOL_LINK_MODE_10baseT1L_Half_BIT according to 802.3cg-2019. -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |