On Mon, Jul 12, 2021 at 09:24:13AM +0200, Martin Schiller wrote:
This adds the possibility to configure the RGMII RX/TX clock skew via
devicetree.
Simply set phy mode to "rgmii-id", "rgmii-rxid" or "rgmii-txid" and add
the "rx-internal-delay-ps" or "tx-internal-delay-ps" property to the
devicetree.
Furthermore, a warning is now issued if the phy mode is configured to
"rgmii" and an internal delay is set in the phy (e.g. by pin-strapping),
as in the dp83867 driver.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Russell King (Oracle) <redacted>
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!