Re: [RFC PATCH net-next] net: dpaa2-mac: add support for more ethtool 10G link modes
From: Ioana Ciornei <ioana.ciornei@nxp.com>
Date: 2021-07-19 09:06:00
On Mon, Jul 12, 2021 at 04:47:10PM +0100, Russell King wrote:
Phylink documentation says: * Note that the PHY may be able to transform from one connection * technology to another, so, eg, don't clear 1000BaseX just * because the MAC is unable to BaseX mode. This is more about * clearing unsupported speeds and duplex settings. The port modes * should not be cleared; phylink_set_port_modes() will help with this. So add the missing 10G modes. Signed-off-by: Russell King <redacted>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
quoted hunk ↗ jump to hunk
--- net-next is currently closed, but I'd like to collect acks for this patch. Thanks. drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++ 1 file changed, 5 insertions(+)diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c index ae6d382d8735..543c1f202420 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c@@ -140,6 +140,11 @@ static void dpaa2_mac_validate(struct phylink_config *config, case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_USXGMII: phylink_set(mask, 10000baseT_Full); + phylink_set(mask, 10000baseCR_Full); + phylink_set(mask, 10000baseSR_Full); + phylink_set(mask, 10000baseLR_Full); + phylink_set(mask, 10000baseLRM_Full); + phylink_set(mask, 10000baseER_Full); if (state->interface == PHY_INTERFACE_MODE_10GBASER) break; phylink_set(mask, 5000baseT_Full);-- 2.20.1