Re: [PATCH net-next V1 3/4] net: stmmac: Reconfigure the PHY WOL settings in stmmac_resume()

No, the interrupt will not be discarded. If the PHY is in interrupt mode, the
interrupt handler will triggers and ISR will clear the WOL status bit. 
The condition here is when the PHY is in polling mode, the PHY driver does not
have any other mechanism to clear the WOL interrupt status bit.
Hence, we need to go through the PHY set_wol() again. 

I would say you have a broken setup. If you are explicitly using the
interrupt as a wakeup source, you need to be servicing the
interrupt. You cannot use polled mode.

	   Andrew