[RFC 06/19] staging: qlge: disable flow control by default
From: Coiby Xu <hidden>
Date: 2021-06-21 13:50:15
Also in:
linux-staging, lkml
Subsystem:
staging subsystem, the rest · Maintainers:
Greg Kroah-Hartman, Linus Torvalds
According to the TODO item,
* the flow control implementation in firmware is buggy (sends a flood of pause frames, resets the link, device and driver buffer queues become desynchronized), disable it by default
Currently, qlge_mpi_port_cfg_work calls qlge_mb_get_port_cfg which gets
the link config from the firmware and saves it to qdev->link_config. By
default, flow control is enabled. This commit writes the
save the pause parameter of qdev->link_config and don't let it
overwritten by link settings of current port. Since qdev->link_config=0
when qdev is initialized, this could disable flow control by default and
the pause parameter value could also survive MPI resetting,
$ ethtool -a enp94s0f0
Pause parameters for enp94s0f0:
Autonegotiate: off
RX: off
TX: off
The follow control can be enabled manually,
$ ethtool -A enp94s0f0 rx on tx on
$ ethtool -a enp94s0f0
Pause parameters for enp94s0f0:
Autonegotiate: off
RX: on
TX: on
Signed-off-by: Coiby Xu <redacted>
---
drivers/staging/qlge/TODO | 3 ---
drivers/staging/qlge/qlge_mpi.c | 11 ++++++++++-
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/qlge/TODO b/drivers/staging/qlge/TODO
index b7a60425fcd2..8c84160b5993 100644
--- a/drivers/staging/qlge/TODO
+++ b/drivers/staging/qlge/TODO@@ -4,9 +4,6 @@ ql_build_rx_skb(). That function is now used exclusively to handle packets that underwent header splitting but it still contains code to handle non split cases. -* the flow control implementation in firmware is buggy (sends a flood of pause - frames, resets the link, device and driver buffer queues become - desynchronized), disable it by default * some structures are initialized redundantly (ex. memset 0 after alloc_etherdev()) * the driver has a habit of using runtime checks where compile time checks are
diff --git a/drivers/staging/qlge/qlge_mpi.c b/drivers/staging/qlge/qlge_mpi.c
index 2630ebf50341..0f1c7da80413 100644
--- a/drivers/staging/qlge/qlge_mpi.c
+++ b/drivers/staging/qlge/qlge_mpi.c@@ -806,6 +806,7 @@ int qlge_mb_get_port_cfg(struct qlge_adapter *qdev) { struct mbox_params mbc; struct mbox_params *mbcp = &mbc; + u32 saved_pause_link_config = 0; int status = 0; memset(mbcp, 0, sizeof(struct mbox_params));
@@ -826,7 +827,15 @@ int qlge_mb_get_port_cfg(struct qlge_adapter *qdev) } else { netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev, "Passed Get Port Configuration.\n"); - qdev->link_config = mbcp->mbox_out[1]; + /* + * Don't let the pause parameter be overwritten by + * + * In this way, follow control can be disabled by default + * and the setting could also survive the MPI reset + */ + saved_pause_link_config = qdev->link_config & CFG_PAUSE_STD; + qdev->link_config = ~CFG_PAUSE_STD & mbcp->mbox_out[1]; + qdev->link_config |= saved_pause_link_config; qdev->max_frame_size = mbcp->mbox_out[2]; } return status;
--
2.32.0