Re: [PATCH] net: ethernet: ti: fix netdev_queue compiling error
From: chenjiahao (C) <hidden>
Date: 2021-06-21 08:19:08
Also in:
lkml
Hi,
Thanks for the review. But still I have a little question in the helper
you just mentioned:
static inline int qdisc_avail_bulklimit(const struct netdev_queue *txq)
{
#ifdef CONFIG_BQL
/* Non-BQL migrated drivers will return 0, too. */
return dql_avail(&txq->dql);
#else
return 0;
#endif
}
In the snippet above, if CONFIG_BQL is not set, 0 will be simply
returned and get printed. Should we distinguish this case, or just let
it be?
Sincerely,
Jiahao Chen
在 2021/6/18 18:40, Grygorii Strashko 写道:On 17/06/2021 14:28, Chen Jiahao wrote:quoted
There is a compiling error in am65-cpsw-nuss.c while not selecting CONFIG_BQL: drivers/net/ethernet/ti/am65-cpsw-nuss.c: In function ‘am65_cpsw_nuss_ndo_host_tx_timeout’: drivers/net/ethernet/ti/am65-cpsw-nuss.c:353:26: error: ‘struct netdev_queue’ has no member named ‘dql’ 353 | dql_avail(&netif_txq->dql), | ^~ This problem is solved by adding the #ifdef CONFIG_BQL directive where struct dql is used. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Chen Jiahao <redacted> --- drivers/net/ethernet/ti/am65-cpsw-nuss.c | 8 ++++++++ 1 file changed, 8 insertions(+)diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.cb/drivers/net/ethernet/ti/am65-cpsw-nuss.c index 6a67b026df0b..a0b30bb763ea 100644--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c@@ -346,12 +346,20 @@ static voidam65_cpsw_nuss_ndo_host_tx_timeout(struct net_device *ndev, tx_chn = &common->tx_chns[txqueue]; trans_start = netif_txq->trans_start; +#ifdef CONFIG_BQL netdev_err(ndev, "txq:%d DRV_XOFF:%d tmo:%u dql_avail:%d free_desc:%zu\n", txqueue, netif_tx_queue_stopped(netif_txq), jiffies_to_msecs(jiffies - trans_start), dql_avail(&netif_txq->dql), k3_cppi_desc_pool_avail(tx_chn->desc_pool)); +#else + netdev_err(ndev, "txq:%d DRV_XOFF:%d tmo:%u free_desc:%zu\n", + txqueue, + netif_tx_queue_stopped(netif_txq), + jiffies_to_msecs(jiffies - trans_start), + k3_cppi_desc_pool_avail(tx_chn->desc_pool)); +#endif if (netif_tx_queue_stopped(netif_txq)) { /* try recover if stopped by us */Seems like there is right helper available - qdisc_avail_bulklimit(). Any way, it most probably has to be solved in generic way on netdev/dql level.