[PATCH net-next 2/8] net: at91_can: add blank line after declarations
From: Guangbin Huang <hidden>
Date: 2021-06-19 10:00:10
Also in:
linux-can, lkml
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
From: Peng Li <redacted> This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by: Peng Li <redacted> Signed-off-by: Guangbin Huang <redacted> --- drivers/net/can/at91_can.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index a2da76796b57..058c18fac167 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c@@ -515,6 +515,7 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev) static inline void at91_activate_rx_low(const struct at91_priv *priv) { u32 mask = get_mb_rx_low_mask(priv); + at91_write(priv, AT91_TCR, mask); }
@@ -529,6 +530,7 @@ static inline void at91_activate_rx_mb(const struct at91_priv *priv, unsigned int mb) { u32 mask = 1 << mb; + at91_write(priv, AT91_TCR, mask); }
@@ -807,6 +809,7 @@ static int at91_poll(struct napi_struct *napi, int quota) if (work_done < quota) { /* enable IRQs for frame errors and all mailboxes >= rx_next */ u32 reg_ier = AT91_IRQ_ERR_FRAME; + reg_ier |= get_irq_mb_rx(priv) & ~AT91_MB_MASK(priv->rx_next); napi_complete_done(napi, work_done);
--
2.8.1