[PATCH net v3 9/9] r8152: disable DelayPhyPwrChg
From: Hayes Wang <hidden>
Date: 2021-06-17 10:00:44
Also in:
linux-usb, lkml
Subsystem:
networking drivers, the rest, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When enabling this, the device would wait an internal signal which wouldn't be triggered. Then, the device couldn't enter P3 mode, so the power consumption is increased. Signed-off-by: Hayes Wang <redacted> --- drivers/net/usb/r8152.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c037fc7adcea..3f425f974d03 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c@@ -31,7 +31,7 @@ #define NETNEXT_VERSION "11" /* Information for net */ -#define NET_VERSION "10" +#define NET_VERSION "11" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
@@ -109,6 +109,7 @@ #define PLA_BP_EN 0xfc38 #define USB_USB2PHY 0xb41e +#define USB_SSPHYLINK1 0xb426 #define USB_SSPHYLINK2 0xb428 #define USB_U2P3_CTRL 0xb460 #define USB_CSR_DUMMY1 0xb464
@@ -384,6 +385,9 @@ #define USB2PHY_SUSPEND 0x0001 #define USB2PHY_L1 0x0002 +/* USB_SSPHYLINK1 */ +#define DELAY_PHY_PWR_CHG BIT(1) + /* USB_SSPHYLINK2 */ #define pwd_dn_scale_mask 0x3ffe #define pwd_dn_scale(x) ((x) << 1)
@@ -4994,6 +4998,10 @@ static void rtl8153_up(struct r8152 *tp) ocp_data &= ~LANWAKE_PIN; ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data); + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1); + ocp_data &= ~DELAY_PHY_PWR_CHG; + ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data); + r8153_aldps_en(tp, true); switch (tp->version) {
--
2.21.0