[PATCH net-next 0/4] Add 25G BASE-R support

This series add the 25G BASE-R mode to the set modes supported.
This mode is used by the Sparx5 Switch for its 25G SerDes.

Steen Hegelund (4):
  dt-bindings: net: Add 25G BASE-R phy interface
  net: phy: Add 25G BASE-R interface mode
  net: sfp: add support for 25G BASE-R SFPs
  net: phylink: Add 25G BASE-R support

 .../devicetree/bindings/net/ethernet-controller.yaml        | 1 +
 Documentation/networking/phy.rst                            | 6 ++++++
 drivers/net/phy/phylink.c                                   | 5 +++++
 drivers/net/phy/sfp-bus.c                                   | 5 +++++
 include/linux/phy.h                                         | 4 ++++
 5 files changed, 21 insertions(+)

-- 
2.32.0