[PATCH net-next v8 00/15] ACPI support for dpaa2 driver

@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to their respective MACs, the PHYs registered
+on the MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
+For each MAC node, a device property "phy-handle" is used to reference
+the PHY that is registered on an MDIO bus. This is mandatory for
+network interfaces that have PHYs connected to MAC via MDIO bus.
+
+During the MDIO bus driver initialization, PHYs on this bus are probed
+using the _ADR object as shown below and are registered on the MDIO bus.
+
+::
+      Scope(\_SB.MDI0)
+      {
+        Device(PHY1) {
+          Name (_ADR, 0x1)
+        } // end of PHY1
+
+        Device(PHY2) {
+          Name (_ADR, 0x2)
+        } // end of PHY2
+      }
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver needs
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).
+
+phy-mode
+--------
+The "phy-mode" _DSD property is used to describe the connection to
+the PHY. The valid values for "phy-mode" are defined in [4].
+
+The following ASL example illustrates the usage of these properties.
+
+DSDT entry for MDIO node
+------------------------
+
+The MDIO bus has an SoC component (MDIO controller) and a platform
+component (PHYs on the MDIO bus).
+
+a) Silicon Component
+This node describes the MDIO controller, MDI0
+---------------------------------------------
+::
+	Scope(_SB)
+	{
+	  Device(MDI0) {
+	    Name(_HID, "NXP0006")
+	    Name(_CCA, 1)
+	    Name(_UID, 0)
+	    Name(_CRS, ResourceTemplate() {
+	      Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+	      Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+	       {
+		 MDI0_IT
+	       }
+	    }) // end of _CRS for MDI0
+	  } // end of MDI0
+	}
+
+b) Platform Component
+The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
+---------------------------------------------------------------------
+::
+	Scope(\_SB.MDI0)
+	{
+	  Device(PHY1) {
+	    Name (_ADR, 0x1)
+	  } // end of PHY1
+
+	  Device(PHY2) {
+	    Name (_ADR, 0x2)
+	  } // end of PHY2
+	}
+
+DSDT entries representing MAC nodes
+-----------------------------------
+
+Below are the MAC nodes where PHY nodes are referenced.
+phy-mode and phy-handle are used as explained earlier.
+------------------------------------------------------
+::
+	Scope(\_SB.MCE0.PR17)
+	{
+	  Name (_DSD, Package () {
+	     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		 Package () {
+		     Package (2) {"phy-mode", "rgmii-id"},
+		     Package (2) {"phy-handle", \_SB.MDI0.PHY1}
+	      }
+	   })
+	}
+
+	Scope(\_SB.MCE0.PR18)
+	{
+	  Name (_DSD, Package () {
+	    ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package () {
+		    Package (2) {"phy-mode", "rgmii-id"},
+		    Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
+	    }
+	  })
+	}
+
+References
+==========
+
+[1] Documentation/networking/phy.rst
+
+[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+
+[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml

@@ -6811,6 +6811,7 @@ F:	Documentation/devicetree/bindings/net/mdio*
 F:	Documentation/devicetree/bindings/net/qca,ar803x.yaml
 F:	Documentation/networking/phy.rst
 F:	drivers/net/mdio/
+F:	drivers/net/mdio/fwnode_mdio.c
 F:	drivers/net/mdio/of_mdio.c
 F:	drivers/net/pcs/
 F:	drivers/net/phy/

@@ -19,6 +19,13 @@ config MDIO_BUS
 	  reflects whether the mdio_bus/mdio_device code is built as a
 	  loadable module or built-in.
 
+config FWNODE_MDIO
+	def_tristate PHYLIB
+	depends on (ACPI || OF) || COMPILE_TEST
+	select FIXED_PHY
+	help
+	  FWNODE MDIO bus (Ethernet PHY) accessors
+
 config OF_MDIO
 	def_tristate PHYLIB
 	depends on OF

@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for Linux MDIO bus drivers
 
-obj-$(CONFIG_OF_MDIO)	+= of_mdio.o
+obj-$(CONFIG_FWNODE_MDIO)	+= fwnode_mdio.o
+obj-$(CONFIG_OF_MDIO)		+= of_mdio.o
 
 obj-$(CONFIG_MDIO_ASPEED)		+= mdio-aspeed.o
 obj-$(CONFIG_MDIO_BCM_IPROC)		+= mdio-bcm-iproc.o

@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * fwnode helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the fwnode and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/fwnode_mdio.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+
+MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
+MODULE_LICENSE("GPL");
+
+static struct mii_timestamper *
+fwnode_find_mii_timestamper(struct fwnode_handle *fwnode)
+{
+	struct of_phandle_args arg;
+	int err;
+
+	if (is_acpi_node(fwnode))
+		return NULL;
+
+	err = of_parse_phandle_with_fixed_args(to_of_node(fwnode), "timestamper", 1, 0, &arg);
+
+	if (err == -ENOENT)
+		return NULL;
+	else if (err)
+		return ERR_PTR(err);
+
+	if (arg.args_count != 1)
+		return ERR_PTR(-EINVAL);
+
+	return register_mii_timestamper(arg.np, arg.args[0]);
+}
+
+int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
+				       struct phy_device *phy,
+				       struct fwnode_handle *child, u32 addr)
+{
+	int rc;
+
+	rc = fwnode_irq_get(child, 0);
+	if (rc == -EPROBE_DEFER)
+		return rc;
+
+	if (rc > 0) {
+		phy->irq = rc;
+		mdio->irq[addr] = rc;
+	} else {
+		phy->irq = mdio->irq[addr];
+	}
+
+	if (fwnode_property_read_bool(child, "broken-turn-around"))
+		mdio->phy_ignore_ta_mask |= 1 << addr;
+
+	fwnode_property_read_u32(child, "reset-assert-us",
+				 &phy->mdio.reset_assert_delay);
+	fwnode_property_read_u32(child, "reset-deassert-us",
+				 &phy->mdio.reset_deassert_delay);
+
+	/* Associate the fwnode with the device structure so it
+	 * can be looked up later
+	 */
+	fwnode_handle_get(child);
+	phy->mdio.dev.fwnode = child;
+
+	/* All data is now stored in the phy struct;
+	 * register it
+	 */
+	rc = phy_device_register(phy);
+	if (rc) {
+		fwnode_handle_put(child);
+		return rc;
+	}
+
+	dev_dbg(&mdio->dev, "registered phy %p fwnode at address %i\n",
+		child, addr);
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_phy_device_register);
+
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+				struct fwnode_handle *child, u32 addr)
+{
+	struct mii_timestamper *mii_ts = NULL;
+	struct phy_device *phy;
+	bool is_c45 = false;
+	u32 phy_id;
+	int rc;
+
+	mii_ts = fwnode_find_mii_timestamper(child);
+	if (IS_ERR(mii_ts))
+		return PTR_ERR(mii_ts);
+
+	rc = fwnode_property_match_string(child, "compatible",
+					  "ethernet-phy-ieee802.3-c45");
+	if (rc >= 0)
+		is_c45 = true;
+
+	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
+		phy = get_phy_device(bus, addr, is_c45);
+	else
+		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+	if (IS_ERR(phy)) {
+		unregister_mii_timestamper(mii_ts);
+		return PTR_ERR(phy);
+	}
+
+	if (is_acpi_node(child)) {
+		phy->irq = bus->irq[addr];
+
+		/* Associate the fwnode with the device structure so it
+		 * can be looked up later.
+		 */
+		phy->mdio.dev.fwnode = child;
+
+		/* All data is now stored in the phy struct, so register it */
+		rc = phy_device_register(phy);
+		if (rc) {
+			phy_device_free(phy);
+			fwnode_handle_put(phy->mdio.dev.fwnode);
+			return rc;
+		}
+	} else if (is_of_node(child)) {
+		rc = fwnode_mdiobus_phy_device_register(bus, phy, child, addr);
+		if (rc) {
+			unregister_mii_timestamper(mii_ts);
+			phy_device_free(phy);
+			return rc;
+		}
+	}
+
+	/* phy->mii_ts may already be defined by the PHY driver. A
+	 * mii_timestamper probed via the device tree will still have
+	 * precedence.
+	 */
+	if (mii_ts)
+		phy->mii_ts = mii_ts;
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register_phy);

@@ -32,65 +32,12 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
 }
 
-static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
-{
-	struct of_phandle_args arg;
-	int err;
-
-	err = of_parse_phandle_with_fixed_args(node, "timestamper", 1, 0, &arg);
-
-	if (err == -ENOENT)
-		return NULL;
-	else if (err)
-		return ERR_PTR(err);
-
-	if (arg.args_count != 1)
-		return ERR_PTR(-EINVAL);
-
-	return register_mii_timestamper(arg.np, arg.args[0]);
-}
-
 int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
-			      struct device_node *child, u32 addr)
+				   struct device_node *child, u32 addr)
 {
-	int rc;
-
-	rc = of_irq_get(child, 0);
-	if (rc == -EPROBE_DEFER)
-		return rc;
-
-	if (rc > 0) {
-		phy->irq = rc;
-		mdio->irq[addr] = rc;
-	} else {
-		phy->irq = mdio->irq[addr];
-	}
-
-	if (of_property_read_bool(child, "broken-turn-around"))
-		mdio->phy_ignore_ta_mask |= 1 << addr;
-
-	of_property_read_u32(child, "reset-assert-us",
-			     &phy->mdio.reset_assert_delay);
-	of_property_read_u32(child, "reset-deassert-us",
-			     &phy->mdio.reset_deassert_delay);
-
-	/* Associate the OF node with the device structure so it
-	 * can be looked up later */
-	of_node_get(child);
-	phy->mdio.dev.of_node = child;
-	phy->mdio.dev.fwnode = of_fwnode_handle(child);
-
-	/* All data is now stored in the phy struct;
-	 * register it */
-	rc = phy_device_register(phy);
-	if (rc) {
-		of_node_put(child);
-		return rc;
-	}
-
-	dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n",
-		child, addr);
-	return 0;
+	return fwnode_mdiobus_phy_device_register(mdio, phy,
+						  of_fwnode_handle(child),
+						  addr);
 }
 EXPORT_SYMBOL(of_mdiobus_phy_device_register);
 

@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * FWNODE helper for the MDIO (Ethernet PHY) API
+ */
+
+#ifndef __LINUX_FWNODE_MDIO_H
+#define __LINUX_FWNODE_MDIO_H
+
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_FWNODE_MDIO)
+int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
+				       struct phy_device *phy,
+				       struct fwnode_handle *child, u32 addr);
+
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+				struct fwnode_handle *child, u32 addr);
+
+#else /* CONFIG_FWNODE_MDIO */
+int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio,
+				       struct phy_device *phy,
+				       struct fwnode_handle *child, u32 addr)
+{
+	return -EINVAL;
+}
+
+static inline int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+					      struct fwnode_handle *child,
+					      u32 addr)
+{
+	return -EINVAL;
+}
+#endif
+
+#endif /* __LINUX_FWNODE_MDIO_H */

@@ -360,18 +360,7 @@ EXPORT_SYMBOL(of_mdio_find_device);
  */
 struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
-	struct mdio_device *mdiodev;
-
-	mdiodev = of_mdio_find_device(phy_np);
-	if (!mdiodev)
-		return NULL;
-
-	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
-		return to_phy_device(&mdiodev->dev);
-
-	put_device(&mdiodev->dev);
-
-	return NULL;
+	return fwnode_phy_find_device(of_fwnode_handle(phy_np));
 }
 EXPORT_SYMBOL(of_phy_find_device);
 

@@ -9,6 +9,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
+#include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <linux/delay.h>
 #include <linux/errno.h>

@@ -2886,6 +2887,67 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 }
 EXPORT_SYMBOL(fwnode_mdio_find_device);
 
+/**
+ * fwnode_phy_find_device - For provided phy_fwnode, find phy_device.
+ *
+ * @phy_fwnode: Pointer to the phy's fwnode.
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ */
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	struct mdio_device *mdiodev;
+
+	mdiodev = fwnode_mdio_find_device(phy_fwnode);
+	if (!mdiodev)
+		return NULL;
+
+	if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+		return to_phy_device(&mdiodev->dev);
+
+	put_device(&mdiodev->dev);
+
+	return NULL;
+}
+EXPORT_SYMBOL(fwnode_phy_find_device);
+
+/**
+ * device_phy_find_device - For the given device, get the phy_device
+ * @dev: Pointer to the given device
+ *
+ * Refer return conditions of fwnode_phy_find_device().
+ */
+struct phy_device *device_phy_find_device(struct device *dev)
+{
+	return fwnode_phy_find_device(dev_fwnode(dev));
+}
+EXPORT_SYMBOL_GPL(device_phy_find_device);
+
+/**
+ * fwnode_get_phy_node - Get the phy_node using the named reference.
+ * @fwnode: Pointer to fwnode from which phy_node has to be obtained.
+ *
+ * Refer return conditions of fwnode_find_reference().
+ * For ACPI, only "phy-handle" is supported. Legacy DT properties "phy"
+ * and "phy-device" are not supported in ACPI. DT supports all the three
+ * named references to the phy node.
+ */
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *phy_node;
+
+	/* Only phy-handle is used for ACPI */
+	phy_node = fwnode_find_reference(fwnode, "phy-handle", 0);
+	if (is_acpi_node(fwnode) || !IS_ERR(phy_node))
+		return phy_node;
+	phy_node = fwnode_find_reference(fwnode, "phy", 0);
+	if (IS_ERR(phy_node))
+		phy_node = fwnode_find_reference(fwnode, "phy-device", 0);
+	return phy_node;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_phy_node);
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init

@@ -1378,6 +1378,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
+struct phy_device *device_phy_find_device(struct device *dev);
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);

@@ -1388,6 +1391,23 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 	return 0;
 }
 
+static inline
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+	return NULL;
+}
+
+static inline struct phy_device *device_phy_find_device(struct device *dev)
+{
+	return NULL;
+}
+
+static inline
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+	return NULL;
+}
+
 static inline
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {

@@ -29,17 +29,7 @@ MODULE_LICENSE("GPL");
  * ethernet-phy-idAAAA.BBBB */
 static int of_get_phy_id(struct device_node *device, u32 *phy_id)
 {
-	struct property *prop;
-	const char *cp;
-	unsigned int upper, lower;
-
-	of_property_for_each_string(device, "compatible", prop, cp) {
-		if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
-			*phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
-			return 0;
-		}
-	}
-	return -EINVAL;
+	return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
 }
 
 static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)

@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>

@@ -1125,6 +1126,59 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct fwnode_handle *phy_fwnode;
+	struct phy_device *phy_dev;
+	int ret;
+
+	/* Fixed links and 802.3z are handled without needing a PHY */
+	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+	     phy_interface_mode_is_8023z(pl->link_interface)))
+		return 0;
+
+	phy_fwnode = fwnode_get_phy_node(fwnode);
+	if (IS_ERR(phy_fwnode)) {
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+			return -ENODEV;
+		return 0;
+	}
+
+	phy_dev = fwnode_phy_find_device(phy_fwnode);
+	/* We're done with the phy_node handle */
+	fwnode_handle_put(phy_fwnode);
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret) {
+		phy_device_free(phy_dev);
+		return ret;
+	}
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.

@@ -441,6 +441,9 @@ void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);

@@ -347,16 +347,7 @@ EXPORT_SYMBOL(of_mdiobus_register);
  */
 struct mdio_device *of_mdio_find_device(struct device_node *np)
 {
-	struct device *d;
-
-	if (!np)
-		return NULL;
-
-	d = bus_find_device_by_of_node(&mdio_bus_type, np);
-	if (!d)
-		return NULL;
-
-	return to_mdio_device(d);
+	return fwnode_mdio_find_device(of_fwnode_handle(np));
 }
 EXPORT_SYMBOL(of_mdio_find_device);
 

@@ -2863,6 +2863,29 @@ static bool phy_drv_supports_irq(struct phy_driver *phydrv)
 	return phydrv->config_intr && phydrv->handle_interrupt;
 }
 
+/**
+ * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
+ * @fwnode: pointer to the mdio_device's fwnode
+ *
+ * If successful, returns a pointer to the mdio_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ * The caller should call put_device() on the mdio_device after its use.
+ */
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+	struct device *d;
+
+	if (!fwnode)
+		return NULL;
+
+	d = bus_find_device_by_fwnode(&mdio_bus_type, fwnode);
+	if (!d)
+		return NULL;
+
+	return to_mdio_device(d);
+}
+EXPORT_SYMBOL(fwnode_mdio_find_device);
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init

@@ -1377,10 +1377,17 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
 #else
+static inline
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+	return 0;
+}
+
 static inline
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {

@@ -115,15 +115,13 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio,
 	else
 		phy = get_phy_device(mdio, addr, is_c45);
 	if (IS_ERR(phy)) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
+		unregister_mii_timestamper(mii_ts);
 		return PTR_ERR(phy);
 	}
 
 	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
 	if (rc) {
-		if (mii_ts)
-			unregister_mii_timestamper(mii_ts);
+		unregister_mii_timestamper(mii_ts);
 		phy_device_free(phy);
 		return rc;
 	}

@@ -111,6 +111,9 @@ void unregister_mii_timestamper(struct mii_timestamper *mii_ts)
 	struct mii_timestamping_desc *desc;
 	struct list_head *this;
 
+	if (!mii_ts)
+		return;
+
 	/* mii_timestamper statically registered by the PHY driver won't use the
 	 * register_mii_timestamper() and thus don't have ->device set. Don't
 	 * try to unregister these.

@@ -945,8 +945,7 @@ EXPORT_SYMBOL(phy_device_register);
  */
 void phy_device_remove(struct phy_device *phydev)
 {
-	if (phydev->mii_ts)
-		unregister_mii_timestamper(phydev->mii_ts);
+	unregister_mii_timestamper(phydev->mii_ts);
 
 	device_del(&phydev->mdio.dev);
 

@@ -834,6 +834,27 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
 	return 0;
 }
 
+/* Extract the phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB.
+ */
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+	unsigned int upper, lower;
+	const char *cp;
+	int ret;
+
+	ret = fwnode_property_read_string(fwnode, "compatible", &cp);
+	if (ret)
+		return ret;
+
+	if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2)
+		return -EINVAL;
+
+	*phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0));
+	return 0;
+}
+EXPORT_SYMBOL(fwnode_get_phy_id);
+
 /**
  * get_phy_device - reads the specified PHY device and returns its @phy_device
  *		    struct

@@ -1377,6 +1377,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 				     bool is_c45,
 				     struct phy_c45_device_ids *c45_ids);
 #if IS_ENABLED(CONFIG_PHYLIB)
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id);
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
 struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
 struct phy_device *device_phy_find_device(struct device *dev);

@@ -1385,6 +1386,10 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
 int phy_device_register(struct phy_device *phy);
 void phy_device_free(struct phy_device *phydev);
 #else
+static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+	return 0;
+}
 static inline
 struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
 {

@@ -10,6 +10,7 @@
 
 #include <linux/device.h>
 #include <linux/err.h>
+#include <linux/fwnode_mdio.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>

@@ -44,43 +45,7 @@ EXPORT_SYMBOL(of_mdiobus_phy_device_register);
 static int of_mdiobus_register_phy(struct mii_bus *mdio,
 				    struct device_node *child, u32 addr)
 {
-	struct mii_timestamper *mii_ts;
-	struct phy_device *phy;
-	bool is_c45;
-	int rc;
-	u32 phy_id;
-
-	mii_ts = of_find_mii_timestamper(child);
-	if (IS_ERR(mii_ts))
-		return PTR_ERR(mii_ts);
-
-	is_c45 = of_device_is_compatible(child,
-					 "ethernet-phy-ieee802.3-c45");
-
-	if (!is_c45 && !of_get_phy_id(child, &phy_id))
-		phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
-	else
-		phy = get_phy_device(mdio, addr, is_c45);
-	if (IS_ERR(phy)) {
-		unregister_mii_timestamper(mii_ts);
-		return PTR_ERR(phy);
-	}
-
-	rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
-	if (rc) {
-		unregister_mii_timestamper(mii_ts);
-		phy_device_free(phy);
-		return rc;
-	}
-
-	/* phy->mii_ts may already be defined by the PHY driver. A
-	 * mii_timestamper probed via the device tree will still have
-	 * precedence.
-	 */
-	if (mii_ts)
-		phy->mii_ts = mii_ts;
-
-	return 0;
+	return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
 }
 
 static int of_mdiobus_register_device(struct mii_bus *mdio,

@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* Copyright 2019 NXP */
 
+#include <linux/acpi.h>
+#include <linux/property.h>
+
 #include "dpaa2-eth.h"
 #include "dpaa2-mac.h"
 

@@ -34,39 +37,51 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
 	return 0;
 }
 
-/* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+						u16 dpmac_id)
 {
-	struct device_node *dpmacs, *dpmac = NULL;
-	u32 id;
+	struct fwnode_handle *fwnode, *parent, *child  = NULL;
+	struct device_node *dpmacs = NULL;
 	int err;
+	u32 id;
 
-	dpmacs = of_find_node_by_name(NULL, "dpmacs");
-	if (!dpmacs)
-		return NULL;
+	fwnode = dev_fwnode(dev->parent);
+	if (is_of_node(fwnode)) {
+		dpmacs = of_find_node_by_name(NULL, "dpmacs");
+		if (!dpmacs)
+			return NULL;
+		parent = of_fwnode_handle(dpmacs);
+	} else if (is_acpi_node(fwnode)) {
+		parent = fwnode;
+	}
 
-	while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
-		err = of_property_read_u32(dpmac, "reg", &id);
+	fwnode_for_each_child_node(parent, child) {
+		err = -EINVAL;
+		if (is_acpi_device_node(child))
+			err = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &id);
+		else if (is_of_node(child))
+			err = of_property_read_u32(to_of_node(child), "reg", &id);
 		if (err)
 			continue;
-		if (id == dpmac_id)
-			break;
-	}
 
+		if (id == dpmac_id) {
+			of_node_put(dpmacs);
+			return child;
+		}
+	}
 	of_node_put(dpmacs);
-
-	return dpmac;
+	return NULL;
 }
 
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
 				 struct dpmac_attr attr)
 {
 	phy_interface_t if_mode;
 	int err;
 
-	err = of_get_phy_mode(node, &if_mode);
-	if (!err)
-		return if_mode;
+	err = fwnode_get_phy_mode(dpmac_node);
+	if (err > 0)
+		return err;
 
 	err = phy_mode(attr.eth_if, &if_mode);
 	if (!err)

@@ -235,26 +250,27 @@ static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
 };
 
 static int dpaa2_pcs_create(struct dpaa2_mac *mac,
-			    struct device_node *dpmac_node, int id)
+			    struct fwnode_handle *dpmac_node,
+			    int id)
 {
 	struct mdio_device *mdiodev;
-	struct device_node *node;
+	struct fwnode_handle *node;
 
-	node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
-	if (!node) {
+	node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
+	if (IS_ERR(node)) {
 		/* do not error out on old DTS files */
 		netdev_warn(mac->net_dev, "pcs-handle node not found\n");
 		return 0;
 	}
 
-	if (!of_device_is_available(node)) {
+	if (!fwnode_device_is_available(node)) {
 		netdev_err(mac->net_dev, "pcs-handle node not available\n");
-		of_node_put(node);
+		fwnode_handle_put(node);
 		return -ENODEV;
 	}
 
-	mdiodev = of_mdio_find_device(node);
-	of_node_put(node);
+	mdiodev = fwnode_mdio_find_device(node);
+	fwnode_handle_put(node);
 	if (!mdiodev)
 		return -EPROBE_DEFER;
 

@@ -283,13 +299,13 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
 int dpaa2_mac_connect(struct dpaa2_mac *mac)
 {
 	struct net_device *net_dev = mac->net_dev;
-	struct device_node *dpmac_node;
+	struct fwnode_handle *dpmac_node;
 	struct phylink *phylink;
 	int err;
 
 	mac->if_link_type = mac->attr.link_type;
 
-	dpmac_node = mac->of_node;
+	dpmac_node = mac->fw_node;
 	if (!dpmac_node) {
 		netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
 		return -ENODEV;

@@ -304,7 +320,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	 * error out if the interface mode requests them and there is no PHY
 	 * to act upon them
 	 */
-	if (of_phy_is_fixed_link(dpmac_node) &&
+	if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
 	    (mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {

@@ -324,7 +340,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	mac->phylink_config.type = PHYLINK_NETDEV;
 
 	phylink = phylink_create(&mac->phylink_config,
-				 of_fwnode_handle(dpmac_node), mac->if_mode,
+				 dpmac_node, mac->if_mode,
 				 &dpaa2_mac_phylink_ops);
 	if (IS_ERR(phylink)) {
 		err = PTR_ERR(phylink);

@@ -335,9 +351,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	if (mac->pcs)
 		phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
 
-	err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+	err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
 	if (err) {
-		netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+		netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
 		goto err_phylink_destroy;
 	}
 

@@ -384,8 +400,8 @@ int dpaa2_mac_open(struct dpaa2_mac *mac)
 	/* Find the device node representing the MAC device and link the device
 	 * behind the associated netdev to it.
 	 */
-	mac->of_node = dpaa2_mac_get_node(mac->attr.id);
-	net_dev->dev.of_node = mac->of_node;
+	mac->fw_node = dpaa2_mac_get_node(&mac->mc_dev->dev, mac->attr.id);
+	net_dev->dev.of_node = to_of_node(mac->fw_node);
 
 	return 0;
 

@@ -399,8 +415,8 @@ void dpaa2_mac_close(struct dpaa2_mac *mac)
 	struct fsl_mc_device *dpmac_dev = mac->mc_dev;
 
 	dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle);
-	if (mac->of_node)
-		of_node_put(mac->of_node);
+	if (mac->fw_node)
+		fwnode_handle_put(mac->fw_node);
 }
 
 static char dpaa2_mac_ethtool_stats[][ETH_GSTRING_LEN] = {

@@ -24,7 +24,7 @@ struct dpaa2_mac {
 	phy_interface_t if_mode;
 	enum dpmac_link_type if_link_type;
 	struct lynx_pcs *pcs;
-	struct device_node *of_node;
+	struct fwnode_handle *fw_node;
 };
 
 bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,

@@ -2,6 +2,7 @@
  * QorIQ 10G MDIO Controller
  *
  * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  *
  * Authors: Andy Fleming <afleming@freescale.com>
  *          Timur Tabi <timur@freescale.com>