[PATCH net-next 7/8] net: ixp4xx_hss: fix the comments style issue
From: Guangbin Huang <hidden>
Date: 2021-06-10 07:23:33
Also in:
lkml
Subsystem:
arm/intel ixp4xx arm architecture, networking drivers, the rest · Maintainers:
Linus Walleij, Imre Kaloz, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Peng Li <redacted> Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by: Peng Li <redacted> Signed-off-by: Guangbin Huang <redacted> --- drivers/net/wan/ixp4xx_hss.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 30a6df4..319ae50 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c@@ -166,8 +166,7 @@ #define CLK46X_SPEED_4096KHZ ((16 << 22) | (280 << 12) | 1023) #define CLK46X_SPEED_8192KHZ ((8 << 22) | (280 << 12) | 2047) -/* - * HSS_CONFIG_CLOCK_CR register consists of 3 parts: +/* HSS_CONFIG_CLOCK_CR register consists of 3 parts: * A (10 bits), B (10 bits) and C (12 bits). * IXP42x HSS clock generator operation (verified with an oscilloscope): * Each clock bit takes 7.5 ns (1 / 133.xx MHz).
@@ -217,7 +216,8 @@ #define PORT_ERROR_READ 0x42 /* triggers the NPE to reset internal status and enable the HssPacketized - operation for the flow specified by pPipe */ + * operation for the flow specified by pPipe + */ #define PKT_PIPE_FLOW_ENABLE 0x50 #define PKT_PIPE_FLOW_DISABLE 0x51 #define PKT_NUM_PIPES_WRITE 0x52
@@ -232,7 +232,8 @@ #define ERR_HDLC_ALIGN 2 /* HDLC alignment error */ #define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */ #define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving - this packet (if buf_len < pkt_len) */ + * this packet (if buf_len < pkt_len) + */ #define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */ #define ERR_HDLC_ABORT 6 /* abort sequence received */ #define ERR_DISCONNECTING 7 /* disconnect is in progress */
@@ -602,7 +603,8 @@ static inline void queue_put_desc(unsigned int queue, u32 phys, BUG_ON(phys & 0x1F); qmgr_put_entry(queue, phys); /* Don't check for queue overflow here, we've allocated sufficient - length and queues >= 32 don't support this check anyway. */ + * length and queues >= 32 don't support this check anyway. + */ } static inline void dma_unmap_tx(struct port *port, struct desc *desc)
--
2.8.1