[PATCH net-next 07/16] net: farsync: remove trailing whitespaces
From: Guangbin Huang <hidden>
Date: 2021-06-08 08:16:14
Also in:
lkml
Subsystem:
farsync synchronous driver, networking drivers, the rest · Maintainers:
Kevin Curtis, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Peng Li <redacted> This patch removes trailing whitespaces. Signed-off-by: Peng Li <redacted> Signed-off-by: Guangbin Huang <redacted> --- drivers/net/wan/farsync.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index f8c7558..7653ff0 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c@@ -524,25 +524,25 @@ do { \ /* PCI ID lookup table */ static const struct pci_device_id fst_pci_dev_id[] = { - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T2P}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T4P}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T1U}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T2U}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_T4U}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_TE1}, - {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID, + {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, FST_TYPE_TE1}, {0,} /* End */ };
@@ -551,11 +551,11 @@ MODULE_DEVICE_TABLE(pci, fst_pci_dev_id); /* Device Driver Work Queues * - * So that we don't spend too much time processing events in the - * Interrupt Service routine, we will declare a work queue per Card + * So that we don't spend too much time processing events in the + * Interrupt Service routine, we will declare a work queue per Card * and make the ISR schedule a task in the queue for later execution. * In the 2.4 Kernel we used to use the immediate queue for BH's - * Now that they are gone, tasklets seem to be much better than work + * Now that they are gone, tasklets seem to be much better than work * queues. */
@@ -1139,7 +1139,7 @@ fst_recover_rx_error(struct fst_card_info *card, struct fst_port_info *port, pi = port->index; /* Discard buffer descriptors until we see the start of the * next frame. Note that for long frames this could be in - * a subsequent interrupt. + * a subsequent interrupt. */ i = 0; while ((dmabits & (DMA_OWN | RX_STP)) == 0) {
@@ -1436,7 +1436,7 @@ fst_intr(int dummy, void *dev_id) /* It is possible to really be running, i.e. we have re-loaded * a running card - * Clear and reprime the interrupt source + * Clear and reprime the interrupt source */ fst_clear_intr(card); return IRQ_HANDLED;
@@ -1616,8 +1616,8 @@ set_conf_from_info(struct fst_card_info *card, struct fst_port_info *port, int err; unsigned char my_framing; - /* Set things according to the user set valid flags - * Several of the old options have been invalidated/replaced by the + /* Set things according to the user set valid flags + * Several of the old options have been invalidated/replaced by the * generic hdlc package. */ err = 0;
@@ -1739,7 +1739,7 @@ gather_conf_info(struct fst_card_info *card, struct fst_port_info *port, info->smcFirmwareVersion = FST_RDL(card, smcFirmwareVersion); /* The T2U can report cable presence for both A or B - * in bits 0 and 1 of cableStatus. See which port we are and + * in bits 0 and 1 of cableStatus. See which port we are and * do the mapping. */ if (card->family == FST_FAMILY_TXU) {
--
2.8.1