[PATCH V3 net-next 3/4] net: phy: realtek: add dt property to enable ALDPS mode
From: Joakim Zhang <hidden>
Date: 2021-06-08 03:16:17
Also in:
linux-devicetree, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
If enable Advance Link Down Power Saving (ALDPS) mode, it will change crystal/clock behavior, which cause RXC clock stop for dozens to hundreds of miliseconds. This is comfirmed by Realtek engineer. For some MACs, it needs RXC clock to support RX logic, after this patch, PHY can generate continuous RXC clock during auto-negotiation. ALDPS default is disabled after hardware reset, it's more reasonable to add a property to enable this feature, since ALDPS would introduce side effect. This patch adds dt property "realtek,aldps-enable" to enable ALDPS mode per users' requirement. Jisheng Zhang enables this feature, changes the default behavior. Since mine patch breaks the rule that new implementation should not break existing design, so Cc'ed let him know to see if it can be accepted. Cc: Jisheng Zhang <redacted> Signed-off-by: Joakim Zhang <redacted> --- drivers/net/phy/realtek.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index ca258f2a9613..79dc55bb4091 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c@@ -76,6 +76,7 @@ MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); struct rtl821x_priv { + u16 phycr1; u16 phycr2; };
@@ -98,6 +99,14 @@ static int rtl821x_probe(struct phy_device *phydev) if (!priv) return -ENOMEM; + priv->phycr1 = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1); + if (priv->phycr1 < 0) + return priv->phycr1; + + priv->phycr1 &= (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF); + if (of_property_read_bool(dev->of_node, "realtek,aldps-enable")) + priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF; + priv->phycr2 = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2); if (priv->phycr2 < 0) return priv->phycr2;
@@ -324,11 +333,16 @@ static int rtl8211f_config_init(struct phy_device *phydev) struct rtl821x_priv *priv = phydev->priv; struct device *dev = &phydev->mdio.dev; u16 val_txdly, val_rxdly; - u16 val; int ret; - val = RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_XTAL_OFF; - phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, val, val); + ret = phy_modify_paged_changed(phydev, 0xa43, RTL8211F_PHYCR1, + RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF, + priv->phycr1); + if (ret < 0) { + dev_err(dev, "aldps mode configuration failed: %pe\n", + ERR_PTR(ret)); + return ret; + } switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII:
--
2.17.1