Re: [PATCH net-next 12/16] gve: DQO: Add core netdev features

On Thu, Jun 24, 2021 at 4:18 PM Samudrala, Sridhar
[off-list ref] wrote:

On 6/24/2021 11:06 AM, Bailey Forrest wrote:

quoted

Add napi netdev device registration, interrupt handling and initial tx
and rx polling stubs. The stubs will be filled in follow-on patches.

Also:
- LRO feature advertisement and handling
- Also update ethtool logic

Signed-off-by: Bailey Forrest <redacted>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Catherine Sullivan <redacted>
---
  drivers/net/ethernet/google/gve/Makefile      |   2 +-
  drivers/net/ethernet/google/gve/gve.h         |   2 +
  drivers/net/ethernet/google/gve/gve_adminq.c  |   2 +
  drivers/net/ethernet/google/gve/gve_dqo.h     |  32 +++
  drivers/net/ethernet/google/gve/gve_ethtool.c |  12 +-
  drivers/net/ethernet/google/gve/gve_main.c    | 188 ++++++++++++++++--
  drivers/net/ethernet/google/gve/gve_rx_dqo.c  |  24 +++
  drivers/net/ethernet/google/gve/gve_tx_dqo.c  |  23 +++
  8 files changed, 260 insertions(+), 25 deletions(-)
  create mode 100644 drivers/net/ethernet/google/gve/gve_dqo.h
  create mode 100644 drivers/net/ethernet/google/gve/gve_rx_dqo.c
  create mode 100644 drivers/net/ethernet/google/gve/gve_tx_dqo.c

diff --git a/drivers/net/ethernet/google/gve/Makefile b/drivers/net/ethernet/google/gve/Makefile
index 0143f4471e42..b9a6be76531b 100644
--- a/drivers/net/ethernet/google/gve/Makefile
+++ b/drivers/net/ethernet/google/gve/Makefile

@@ -1,4 +1,4 @@
  # Makefile for the Google virtual Ethernet (gve) driver

  obj-$(CONFIG_GVE) += gve.o
-gve-objs := gve_main.o gve_tx.o gve_rx.o gve_ethtool.o gve_adminq.o gve_utils.o
+gve-objs := gve_main.o gve_tx.o gve_tx_dqo.o gve_rx.o gve_rx_dqo.o gve_ethtool.o gve_adminq.o gve_utils.o

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 8a2a8d125090..d6bf0466ae8b 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h

@@ -45,6 +45,8 @@
  /* PTYPEs are always 10 bits. */
  #define GVE_NUM_PTYPES      1024

+#define GVE_RX_BUFFER_SIZE_DQO 2048
+
  /* Each slot in the desc ring has a 1:1 mapping to a slot in the data ring */
  struct gve_rx_desc_queue {
      struct gve_rx_desc *desc_ring; /* the descriptor ring */

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index cf017a499119..5bb56b454541 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c

@@ -714,6 +714,8 @@ int gve_adminq_describe_device(struct gve_priv *priv)
      if (gve_is_gqi(priv)) {
              err = gve_set_desc_cnt(priv, descriptor);
      } else {
+             /* DQO supports LRO. */
+             priv->dev->hw_features |= NETIF_F_LRO;

Shouldn't this be NETIF_F_HW_GRO?
Also, what does DQO stands for?

DQO stands for "Dual Queue Out of order completions"

For now we only support LRO. HW GRO support may come in the future.

The reason for this is I was unable to get HW GRO to function in
conjunction with `napi_gro_frags()`. On our system, we need to use
`napi_gro_frags()` to achieve good performance. I did not see any
other drivers which support NETIF_F_HW_GRO and also use
`napi_gro_frags()`.

<snip>